• Jan. 31, 2024 (Wed.) 9:30 ~ 11:30

  Main Theater［East hall 4］
• 【nano tech Special Symposium】R&D Frontiers of Sulfide All-Solid-State Batteries

  Pre-Registration required

  
  

  ---

  

  9:30-10:10

  All-Solid-State Batteries - Current Status and Future of Research and Technological Development

  Ryoji Kanno
  Tokyo Institute of Technology
  Institute Professor, Director of Research Center for All-Solid-State Battery,
  

  ---

  

  10:10-10:50

  Characteristics and development of Argyrodite type sulfide solid electrolytes for all-solid-state batteries.

  Mr. Tsukasa Takahashi
  MITSUI MINING & SMELTING
  Business Strategy Office, SE Business Development Unit, Business Creation Sector,
  Deputy General Manager,
  

  ---

  

  10:50-11:30

  Development of All-solid-state Batteries Using Lithium Argyrodite Electrolyte

  Dr. Masayuki Yamada
  Maxell
  Business Development Department, New Business Producing Division,
  Senior Manager,
  

• Jan. 31, 2024 (Wed.) 10:00 ~ 12:00

  TOC Ariake Convention Hall
• [Ceremony] 2023 Energy Conservation Grand Prize Award Ceremony

  
  

• Jan. 31, 2024 (Wed.) 10:15 ~ 12:15

  Seeds & Needs Seminar C [East hall 5]
• Special Symposium: MEMS/Semiconductor Next Generation Technology Forum

  Pre-Registration required

  
  

  ---

  

  10:15-10:45

  Semiconductor/Digital industrial strategy

  Mr. Hidemichi Shimizu
  Ministry of Economy, Trade and Industry Commerce and Information Policy Bureau
  Device Industry & Semiconductor Strategy Office
  Director
  

  ---

  

  10:45-11:15

  Industry-Academia Collaborative Research on MEMS: Past & Future

  Prof. Hiroshi Toshiyoshi
  University of Tokyo
  Institute of Industrial Science (IIS)
  

  ---

  

  11:15-11:45

  RF Filter Technologies: Enabling the mobile evolution

  Dr. Alexandre Shirakawa
  Skyworks Solutions, Inc.
  Vice President of Engineering
  

  ---

  

  11:45-12:15

  Development of sensing technology in the semiconductor field at AIST Sensing System Research Center

  Dr. Sei Uemura
  National Institute of Advanced Industrial Science and Technology (AIST)
  Director-General AIST Kyushu/ Director, Sensing System Research Center (SSRC)
  

• Jan. 31, 2024 (Wed.) 10:15 ~ 16:00

  TCT Main Stage［East hall 3］
• TCT Japan Conference Day 1【EVALUATION - GLOBAL INDUSTRY OVERVIEW AND BUSINESS CONSIDERATIONS】

  Short Discussion (Q&A)

  Short Discussion (Q&A)

  Pre-Registration required

  Simultaneous interpretation

  
  

  ---

  

  10:15-10:25

  Opening remark

  Mr. Duncan Wood
  Rapid News Group
  Chief Executive
  

  ---

  

  10:30-11:10

  Additive Manufacturing State of the Industry

  Mr. Terry Wohlers
  Wohlers Associates, powered by ASTM International
  Head of Advisory Services and Market Intelligence
  

  ---

  

  11:15-11:30

  Short Discussion (Q&A)

  Mr. Terry Wohlers
  Wohlers Associates, powered by ASTM International
  Head of Advisory Services and Market Intelligence
  

  ---

  

  11:15-11:30

  Short Discussion (Q&A)

  Mr. Hideaki Oba
  Japan 3D Printing Industrial Technology Association
  

  ---

  

  11:15-11:30

  Short Discussion (Q&A)

  Mr. Tsukasa Matsuoka
  Japan 3D Printing Industrial Technology Association
  Managing Director / Researcher
  

  ---

  

  11:40-12:20

  The Future of Machine Parts Manufacturing Industries in Japan

  Mr. Masashi Hoshino
  Ministry of Economy, Trade and Industry
  

  ---

  

  12:30-13:10

  The Additive Manufacturing Transformation: Empowering (Distributed) Manufacturing with 3D Printing

  Dr. Wilderich Heising
  Boston Consulting Group
  Partner and Associate Director
  

  ---

  

  13:15-13:30

  Short Discussion (Q&A)

  Dr. Wilderich Heising
  Boston Consulting Group
  Partner and Associate Director
  

  ---

  

  13:15-13:30

  Short Discussion (Q&A)

  Mr. Tsukasa Matsuoka
  Japan 3D Printing Industrial Technology Association
  Managing Director / Researcher
  

  ---

  

  13:15-13:30

  Short Discussion (Q&A)

  Mr. Hideaki Oba
  Japan 3D Printing Industrial Technology Association
  

  ---

  

  13:40-14:20

  3D Printing a Sustainable Future - The Importance of product and process life-cycle analysis

  Dr. Philip Reeves
  Reeves insight Ltd
  Managing Director
  

  ---

  

  14:30-15:10

  Leveraging Additive Practices for More Sustainable Manufacturing: Use-Case Studies

  Ms. Sherri Monroe
  Additive Manufacturer Green Trade Association (AMGTA)
  Executive Director
  

  ---

  

  15:20-16:00

  3D Printing Construction in Japan

  Mr. Shizuo Harada
  Nomura Securities Co., Ltd
  

• Jan. 31, 2024 (Wed.) 10:20 ~ 11:00

  Convertech Stage［East hall 6］
• Opening Session for WELL-BEING TECHNOLOGY

  Pre-Registration required

  
  

  ---

  

  10:20-11:00

  Accelerating Bio-Signal DX Using Flexible Electronics

  Prof. Tsuyoshi Sekitani
  Osaka University
  Professor
  

• Jan. 31, 2024 (Wed.) 10:20 ~ 11:45

  Material Stage［East hall 5］
• The Circular Economy and Sustainable Materials

  Pre-Registration required

  
  

  ---

  

  10:20-11:00

  Issues and prospects in promoting material recycling, considerations from the perspective of a food manufacturer

  Mr. Hiroshi Toyosaki
  Ajinomoto Co., Inc.
  Sustainability (Environmental) Group, Sustainability Development Dept.
  Associate General Manager
  

  ---

  

  11:15-11:45

  Kao's Challenge for plastic circular economy and the action of cosmetic industry

  Mr. Shuhei Matsumoto
  Kao Corporation
  R&D Packaging Technology Research
  Director
  

• Jan. 31, 2024 (Wed.) 10:30 ~ 11:00

  Seeds & Needs Seminar B［East hall 4］
• 
  

• Jan. 31, 2024 (Wed.) 10:30 ~ 12:00

  Stage A［East hall 8］
• InterAqua organizers seminar

  Pre-Registration required

  
  

• Jan. 31, 2024 (Wed.) 10:30 ~ 12:30

  ASTEC/SURTECH Stage [East hall 3]
• Surface Technology Conference【DAY1】

  Pre-Registration required

  
  

  ---

  

  10:30-11:00

  Reduction of Interface Resistance between Electrolyte and Electrode in Sulfide-Based All-Solid-State Batteries

  Prof. Taro Hitosugi
  The University of Tokyo
  

  ---

  

  11:00-11:30

  Ph.D. Takeshi Kobayashi
  Central Research Institute of Electric Power Industry
  

  ---

  

  11:30-12:00

  Diamond semiconductors realize next-generation power devices

  Prof. Hiroshi Kawarada
  Waseda University
  

  ---

  

  12:00-12:30

  High heat dissipation/ nitride materials and their application for power devices

  Dr. Yukihiro Kanechika
  Tokuyama Corporation
  Thermal Management Application Dept., New Business Div.
  Group Leader
  

• Jan. 31, 2024 (Wed.) 11:00 ~ 12:00

  Stage D［East hall 7］
• Next Generation Power Network Seminar

  Pre-Registration required

  
  

  ---

  11:00-11:30

  Mr. Shuhei Yamamoto
  
  

  ---

  11:30-12:00

  Optimization of Battery Energy Storage System(BESS) and Energy Management System(EMS) for the Decarbonization Goal

  Mr. Nobuyuki Hattori
  DAIHEN Corporation
  Vice President, Division Director of Energy Management System Div.
  

• Jan. 31, 2024 (Wed.) 11:15 ~ 11:45

  Seeds & Needs Seminar A［East hall4］
• Introducing the flagship model S230, a microArch® 3D printer system that achieves the world's highest precision level and applications in the MEMS field.

  Pre-Registration not required

  
  
  Mr. Akio Tamura
  BMF Japan Inc.
  Business Manager
  

• Jan. 31, 2024 (Wed.) 11:15 ~ 11:55

  WELL-TECH Stage［East hall 5］
• Product development that creates "WELL-BEING"

  Pre-Registration required

  
  
  

  Prof. Tsuyoshi Sekitani
  Osaka University
  Professor
  

  ---

  

  Dr. Watanabe Junji
  NTT Communication Science Laboratories
  

  ---

  

  Ms. Mayuka Fukushima
  

  Moderator

  NTT Communications Corporation
  First Business Solutions / Marketing in Business Solution Division
  Catalyst "Business Producer"
  

• Jan. 31, 2024 (Wed.) 11:15 ~ 12:30

  Convertech Stage［East hall 6］
• Environmental trends in packaging and the possibilities of paper

  Pre-Registration required

  
  

  ---

  

  11:15-11:45

  Packaging Design, Recycling, and Printing Trends in the era of Circular Economy

  Mr. Uchimura Genichi
  Pack Yell
  President
  

  ---

  

  11:45-12:15

  The role of paper as an eco friendly material
  ~ Packaging development and recycling ~

  Mr. Takaharu Noda
  Nippon Paper Industries Co., Ltd.
  Paper-Pak Global Sales Management Department
  Senior manager
  

• Jan. 31, 2024 (Wed.) 11:20 ~ 11:50

  Stage C［East hall 7］
• 【ENEX】Exhibitor Presentation

  Pre-Registration not required

  
  

  ---

  11:20-11:50

  Energy-saving Ammonia Recovery Equipment and Fixing Carbon Dioxide.

  Mr. Ikeda Hiroshi
  KIMURA CHEMICAL PLANTS CO., LTD.
  Engineering Division.
  General Manager
  

• Jan. 31, 2024 (Wed.) 11:30 ~ 13:15

  Seeds & Needs Seminar B［East hall 4］
• Frontiers in process and characterization for practical fine particle highly concentrated dispersion systems -Report on joint experiments on next-generation electronics and rechargeable batteries-

  Pre-Registration required

  
  
  Dr. Shin-ichi Takeda
  Center for Colloid and Dispersion Technology
  

  ---

  Mr. Akihiro Igarashi
  AIMEX CO.,Ltd.
  

  ---

  Dr. Maiko Kawakubo
  PRIMIX Corporation, Emulsification and Dispersion Technology Laboratory
  

  ---

  Mr. Fumihiko Takaoka
  SHASHIN KAGAKU CO.,LTD.
  

  ---

  Mr. Keisuke Miyamoto
  Anton Paar Japan K.K.
  

  ---

  Ms. Noe Koto
  NIKKATO CORPORATION
  

• Jan. 31, 2024 (Wed.) 11:45 ~ 13:45

  Main Theater［East hall 4］
• 【nano tech Special Symposium】Best practices of regional GX by industrial application of Cellulose Nano Fiber -CNF is a new local resource for the realization of a carbon neutral society-

  Pre-Registration required

  
  

  ---

  

  11:45-11:55

  The forefront of regional GX using CNF
  Challenges and Solutions for Revitalizing Local Economies by industrial application of Cellulose Nanofiber

  Dr. Masayoshi Watanabe
  Nanocellulose Japan
  Representative of CNF Open Innovation School
  
  Kyoto University
  Research Institute for Sustainable Humanosphere
  Professor/Cordination Fellow
  

  ---

  

  11:55-12:05

  Initiatives of Shizuoka Prefecture and Fuji City towards social implementation of CNF

  Prof. Kenji Aoki
  Shizuoka University
  Faculty of Global Interdisplinary Science and Innovation
  Associate Professor, Chairman of Fuji City CNF Platform
  

  ---

  

  12:05-12:15

  Efforts Toward the Practical Use of CNF in Okayama

  Mr. Katsushi Nishi
  Industrial Technology Center of Okayama Prefecture
  Director General (Leader, Okayama CNF Network)
  

  ---

  

  12:15-12:25

  CNF research and development activities in Shikoku region

  Prof. Hiromi Uchimura
  Ehime University
  Paper Industry Innovation Center of Ehime-university
  Director, Paper Industry Innovation Center of Ehime-university/ Chairman, Shikoku CNF Platform
  

  ---

  

  12:25-12:35

  Various CNF applications in Japan

  Dr. Kazuo Kitagawa
  Kyoto Municipal Institute of Industrial Technology and Culture
  Research Fellow
  

  ---

  

  12:35-12:45

  Activity at Bio-nanomaterials HUB

  Prof. Hiroyuki Yano
  Kyoto University
  Professor, RISH
  

• Jan. 31, 2024 (Wed.) 12:00 ~ 12:30

  TCT Introducing Stage［East hall 3］
• Introducing VHS-CUBE, a small degreasing and sintering furnace for metal 3D

  Pre-Registration not required

  
  
  Ms. Mizuki Hara
  Shimadzu Industrial Systems Co.,Ltd.
  Industrial Furnace.
  

• Jan. 31, 2024 (Wed.) 12:00 ~ 12:30

  Material Stage［East hall 5］
• Antibacterial, antifungal, antiviral agent About water-soluble silver ion complex CitAg2400

  Pre-Registration required

  
  
  

  Mr. yoshinori sasaki
  Sasaki Chemical Industry Co., Ltd.
  

• Jan. 31, 2024 (Wed.) 12:15 ~ 13:35

  WELL-TECH Stage［East hall 5］
• [TALK SESSION] What makes a "WELL-BEING" service for the post-SDGs? Ask leading practitioners

  Pre-Registration required

  
  
  

  Ph.D. Shuntaro Okazaki
  

  Guest

  Shiseido
  MIRAI Technology Institute
  Senior researcher
  

  ---

  

  Ms. Yuki Sunami
  

  Guest

  Aizu Lifescape Design Studio
  
  Dentsu Japan Yuki SUnami
  

  ---

  

  Mr. Yosuke Honda
  

  Guest

  SEMBA
  Ethical Design Lab.
  Planning Manager
  
  Tokyo Zokei University,
  Lecturer of Furniture, Interior & Architecture Major (part-time)
  

  ---

  

  Dr. Junji Watanabe
  

  Commentator

  NTT Communication Science Laboratories
  Sensory Resonance Research Group, Human Information Science Laboratories
  Junji Watanabe Senior Distinguished Researcher
  

• Jan. 31, 2024 (Wed.) 12:20 ~ 13:05

  Stage D［East hall 7］
• InterAqua organizers seminar

  Pre-Registration required

  
  

  ---

  

  12:20-12:35

  Water purification by Photocatalysis

  Ph.D. NEGISHI Nobuaki
  National Institute of Advanced Industrial Science and Technology (AIST)
  Environmental Management Research Institute
  Chief Senior Researcher
  

  ---

  

  12:35-12:50

  Biomarker sensing aiming at water environment diagnosis

  Dr. Aoki Hiroshi
  National Institute of Advanced Industrial Science and Technology (AIST)
  Environmental Management Research Institute
  Research Group Leader
  

  ---

  

  12:50-13:05

  Application of microbial community analysis to wastewater treatment research

  Dr. Yuya Sato
  National Institute of Advanced Industrial Science and Technology (AIST)
  Environmental Management Research Institute
  Senior Researcher
  

• Jan. 31, 2024 (Wed.) 12:30 ~ 14:00

  Stage A［East hall 8］
• Geothermal Heat Seminar

  Pre-Registration required

  
  

  ---

  12:30-13:00

  
  

  ---

  

  13:00-13:30

  NET ZERO ENERGY BUILDING UTILIZING HIGH EFFICIENCY ATES IN JAPANESE SNOWY REGIONS

  Dr. Masahiko Katsuragi
  Japan Groundwater Development Co., Ltd.
  Senior Managing Director
  
  Non-Profit Organization Geo-Heat Promotion Association of Japan
  System Measures Division
  Director
  

  ---

  

  13:30-14:00

  a

  Prof. Tomoyuki Ohtani
  Gifu University
  Department of Civil Engineering, Faculty of Engineering
  Professor
  

• Jan. 31, 2024 (Wed.) 12:30 ~ 14:15

  Seeds & Needs Seminar C [East hall 5]
• ARIM Award Ceremony for Technical Staff

  Pre-Registration not required

  
  
  Dr. Junichi Sone
  Advanced Research Infrastructure for Materials and Nanotechnology in Japan
  Program Director
  

• Jan. 31, 2024 (Wed.) 12:45 ~ 13:15

  TCT Introducing Stage［East hall 3］
• Accelerating Large-Scale parts Manufacturing! The possibilities offered by the EXT Titan pellet, an AM + NC hybrid pellet extrusion 3D printer.

  Pre-Registration not required

  
  
  

  Mr. Yoshihiro HASHIZUME
  SWANY Co., Ltd.
  President & CEO
  

  ---

  

  Mr. NAMIKI Takao
  3D Systems Japan
  Industrial Solution Group
  Japan Sales Director
  

• Jan. 31, 2024 (Wed.) 12:45 ~ 13:15

  Seeds & Needs Seminar A［East hall4］
• Non-contact filtration technology using electric field filtration: Introduction of the electric field filter "Ele-Fil"

  Pre-Registration not required

  
  
  Mr. OMORI Kazuki
  Mitsubishi Kakoki Kaisha,Ltd.
  Research & Development Department
  Technical Adviser
  

• Jan. 31, 2024 (Wed.) 12:45 ~ 13:45

  Material Stage［East hall 5］
• The leading edge of lignin-based materials

  Pre-Registration required

  
  
  

  Dr. Tatsuhiko Yamada
  Lignin Network
  

  ---

  

  Prof. Takashi Yamashita
  Tokyo University of Technology
  

• Jan. 31, 2024 (Wed.) 13:00 ~ 13:30

  Stage C［East hall 7］
• Pre-Registration not required

  
  

• Jan. 31, 2024 (Wed.) 13:00 ~ 14:15

  ASTEC/SURTECH Stage [East hall 3]
• SURTECH Coating/Painting seminor

  Pre-Registration required

  
  

  ---

  

  13:00-13:30

  Indium mirror coating system - Realization of mirror coating film by painting -

  Mr. Fuse Masazumi
  Takubo Engineering co., ltd.
  Sales & Marketing Division
  Manager
  

  ---

  

  13:45-14:15

  Development and Future Prospects of Hybrid Coating Technology as Pretreatment prior to Painting

  Mr. Yusuke Miura
  Nippon Paint Surf Chemicals Co., Ltd.
  Fundamental Technology Unit, Advanced Products Div.
  Unit Manager
  

• Jan. 31, 2024 (Wed.) 13:00 ~ 16:55

  Convertech Stage［East hall 6］
• Special Program Organized by Society for Specialty Film

  Pre-Registration required

  
  

  ---

  

  13:50-14:40

  A New Visual experiences created by Special Screen for Ultra Short Throw Projector.

  Mr. Yoshihiro Oshima
  TVS REGZA Corporation
  Laser Display Advanced Technology Institute
  Deputy General Manager
  

  ---

  

  14:45-15:35

  Total Solutions for Mass Production of Micro LED Display

  Mr. Hidetomo Umeda
  Toray Engineering Co., Ltd
  Mechatronics & Fine Technology Div., 1st Business Div.
  Account Manager
  

  ---

  

  15:40-16:30

  Display Technologies for Immersive Media Experiences

  Dr. Fujisaki Yoshihide
  NHK Scienece & Technology Laboratories
  

• Jan. 31, 2024 (Wed.) 13:10 ~ 13:40

  Stage B［East hall 8］
• 【Offshore Tech Japan】Exhibitor Presentation

  Pre-Registration not required

  
  

• Jan. 31, 2024 (Wed.) 13:30 ~ 14:00

  TCT Introducing Stage［East hall 3］
• Introduction of post-processing machine "Powder Separation and Recovery System" and post-processing system for PDF type metal 3D printers.

  Pre-Registration not required

  
  
  Mr. Kajita Koji
  SINTOKOGIO, LTD.
  Development Group
  Assistant Manager
  

• Jan. 31, 2024 (Wed.) 13:30 ~ 14:00

  Seeds & Needs Seminar A［East hall4］
• Introduction of ZEISS Connected Microscopy for the Age of Materials Informatics

  Pre-Registration not required

  
  
  Mr. Etsuo Maeda
  Carl Zeiss Co., Ltd
  Research Microscopy Solutions
  

• Jan. 31, 2024 (Wed.) 13:30 ~ 14:15

  Seeds & Needs Seminar B［East hall 4］
• Particle size control of secondary battery cathode active material

  Pre-Registration not required

  
  
  Mr. Seki Takehiro
  YOSHIDAKIKAI
  Assistant Manager
  

• Jan. 31, 2024 (Wed.) 13:30 ~ 15:30

  Surface Finishing Seminar [East hall 3 Entrance]
• Surface Technology Association Subcommittee Lecture

  Pre-Registration not required

  
  

  ---

  

  13:35-14:05

  Effect of nanostructure of porous type anodic oxide on heat crack formation behavior

  Dr. Daiki Nakajima
  UACJ Corporation
  

  ---

  

  13:35-14:05

  Effect of nanostructure of porous type anodic oxide on heat crack formation behavior

  Mr. Junji Nunomura
  UACJ Corporation
  

  ---

  

  13:35-14:05

  Effect of nanostructure of porous type anodic oxide on heat crack formation behavior

  Prof. Tatsuya Kikuchi
  Hokkaido University
  

  ---

  

  14:15-14:45

  Hard anodized aluminum with excellent heat cracking resistance

  Ms. Ayumi Hongo
  OKUNO CHEMICAL INDUSTRIES CO.,LTD.
  Advanced R&D Laboratorites
  Chief Research
  

  ---

  14:55-15:25

  Micro Arc Oxidation Treatment for Flat Panel Display Vacuum Equipment

  Mr. Fumiaki Ishigure
  ULVAC, Inc.
  Institute of Advanced Reserch Section
  

• Jan. 31, 2024 (Wed.) 13:30 ~ 16:30

  Stage D［East hall 7］
• InterAqua organizers seminar

  Pre-Registration required

  
  

  ---

  

  13:30-13:40

  Opening Speech and Introduction of Future Life and Water Science Research Group

  Prof. Madoka Takai
  The University of Tokyo
  

  ---

  

  13:40-14:00

  Biosensors for monitoring biological information

  Prof. Madoka Takai
  The University of Tokyo
  

  ---

  

  14:00-14:20

  A Study on Stripe Gate Electrode Type pH Sensor for Long-term Stable Measurement

  Ph.D. Masato Futagawa
  Shizuoka University
  

  ---

  

  14:20-14:40

  Development of a Multi-Parameter Water Quality Meter For Reducing Time Spent on Site

  Mr. Kazuhiro Irie
  HORIBA Advanced Techno, Co., Ltd.
  

  ---

  

  14:40-15:00

  The Measuring Terminal of Water Quality with Simple Structure - For Easier Assessment of Water Quality

  Mr. Masayuki Kawakami
  Organo Corporation
  

  ---

  

  15:05-15:25

  Water Treatment Technology with Ozone

  Tada Electric Co., Ltd.
  

  ---

  

  15:25-15:45

  Earth Positive starting with water from the Shinshu University Crystal

  Prof. Katsuya Teshima
  Shinshu University
  

• Jan. 31, 2024 (Wed.) 13:45 ~ 15:40

  WELL-TECH Stage［East hall 5］
• Exhibitors' Pitch Presentations

  Pre-Registration required

  
  

• Jan. 31, 2024 (Wed.) 13:50 ~ 14:20

  Stage C［East hall 7］
• 【DER・Microgrid Japan 2024】Exhibitor Presentation

  Pre-Registration not required

  
  

• Jan. 31, 2024 (Wed.) 14:00 ~ 14:30

  Material Stage［East hall 5］
• Introduction for New Filler Masterbatch for acieving Ligtweight and Strong plastic molding "SEMELAKE™ MB MOS-5G"

  Pre-Registration required

  
  
  

  Mr. Koichi Masaaki
  SHIRAISHI CALCIUM KAISHA,LTD.
  Corporate Officer, R&D
  

• Jan. 31, 2024 (Wed.) 14:00 ~ 14:45

  Main Theater［East hall 4］
• Pre-Registration not required

  
  
  Taiwan Pavilion
  

• Jan. 31, 2024 (Wed.) 14:00 ~ 15:30

  TOC Ariake Convention Hall
• 〚Ceremony] 2023 New Energy Grand Prize Award Ceremony

  
  

• Jan. 31, 2024 (Wed.) 14:00 ~ 16:40

  Stage B［East hall 8］
• Use of marine renewable energy

  Pre-Registration required

  
  

  ---

  

  14:00-14:40

  Floating Offshore Wind Turbine

  Mr. Takao Kuroiwa
  National Maritime Research Institute
  

  ---

  

  14:40-15:10

  Toward International Contribution through the Japanese "GX Island Model" with Ocean Thermal Energy Conversion at its Core

  Mr. Yasuyuki Ikegami
  Institute of Ocean Energy, Saga University
  

  ---

  15:40-16:10

  Dr. Yasushi Shiobara
  Promotion and Research Institute for Ocean Economics
  Research division
  Director research division, Director secretariat
  

  ---

  

  16:10-16:35

  Mr. Tatsuya Nagamatsu
  Kyuden Mirai Energy Co.,INC
  

• Jan. 31, 2024 (Wed.) 14:15 ~ 14:45

  TCT Introducing Stage［East hall 3］
• UltiMaker's vision for the future of industry from education.

  Pre-Registration not required

  
  
  

  Mr. Ikeda Kayne
  UltiMaker
  Japanese and Korean representatives of UltiMaker
  

  ---

  

  Mr. Hayashi Kengo
  Brule Inc.
  

• Jan. 31, 2024 (Wed.) 14:15 ~ 14:45

  Seeds & Needs Seminar A［East hall4］
• Using informatics for scale-up - from lab-scale to factory-scale.

  Pre-Registration not required

  
  
  Mr. Toru Yashima
  MI-6 Ltd.
  

• Jan. 31, 2024 (Wed.) 14:30 ~ 15:15

  Seeds & Needs Seminar C [East hall 5]
• Nanoparticle-mist Deposition Method: An Environmentally Friendly Process for Fabricating Highly Functional Thin Films

  Pre-Registration not required

  
  
  Mr. Yoshiaki Kito
  NIKON CORPORATION
  

  ---

  Mr. Kiyoshi Kanie
  Tohoku University
  Institution: International Center for Synchrotron Radiation Innovation Smart,
  Professor
  

• Jan. 31, 2024 (Wed.) 14:30 ~ 16:35

  Stage A［East hall 8］
• Offshore Wind Power and the Expansion of Wind Power Utilization

  Pre-Registration required

  
  

  ---

  

  14:30-14:55

  NEDO’s activities toward expansion of offshore wind power generation

  Ph.D. Chizuru Owada
  NEDO
  

  ---

  

  14:55-15:20

  Development and construction of Ishikari Offshore Wind Farm

  Mr. Kenichi Takata
  Green Power Investment Corporation
  Offshore Technical Department Offshore Business Development
  Head
  

  ---

  

  15:20-15:45

  Promoting young people and women in the wind industry

  Ms. Yuko Ueda
  Japan Wind Energy Association
  

  ---

  

  15:45-16:10

  Taiwan offshore wind farm - What we learned from operating experience

  Mr. Ikuo Tobinaga
  Hitachi, Ltd.
  

  ---

  

  16:10-16:35

  Current status of Japanese offshore wind generation and challenge to enhance competitiveness

  Mr. Takashi Matsunobu
  JAPAN WIND ENERGY ASSOCIATION
  Board Member
  
  TODA Corporation
  Floating Offshore Wind Technology Department, Civil Engineering Coordination Department
  Director
  

• Jan. 31, 2024 (Wed.) 14:30 ~ 17:00

  Seeds & Needs Seminar B［East hall 4］
• Startup＆Academia Pitch

  Pre-Registration not required

  
  

  ---

  14:30-14:45

  High magnetic flux density and ultra-low loss soft magnetic material M alloy

  Makino
  

  ---

  14:50-15:05

  Co-LABO MAKER
  

  ---

  15:10-15:25

  New next generation power semiconductor(GeO2) and potential of its deposition methode named Mist CVD and Phantom SVD(Spatial Vapor Deposition )

  Mr. Koji Kunieda
  Patentix
  

  ---

  15:30-15:45

  Applications of ALD (Atomic Layer Deposition) and what ALD Japan offers

  Mr. Wataru Momose
  ALD Japan, Inc.
  Manager
  

  ---

  15:50-16:05

  Revelational AI Nano Particle Image Analysis
  Deep Leaning drives new nano particle/fiber analysis to another level. Polygonal, agglomerated, grain particles and nanotube subject to precision analysis

  Mr. Nakao Yuki
  BLUE TAG
  Business Development Division
  

  ---

  16:10-16:25

  Eco-friendly synthesis of functional nanomaterials

  Prof. Kiyofumi Yamagiwa
  Teikyo university of science, Yamagiwa laboratory
  

• Jan. 31, 2024 (Wed.) 14:40 ~ 15:10

  Stage C［East hall 7］
• Pre-Registration not required

  
  

  ---

  14:40-15:10

  PowerX's storage battery solution - Promoting renewable energy management and reducing electricity costs made possible by storage batteries -

  Mr. Takahiro Matsumoto
  PowerX, Inc.
  Battery Energy Storage System Business - Sales Division
  Manager
  

• Jan. 31, 2024 (Wed.) 14:45 ~ 15:15

  Material Stage［East hall 5］
• Pioneering the Future of High-Performance Materials with Nanoscale Technology

  Pre-Registration required

  
  
  

  Mr. Shunya Chosokabe
  FiberCraze Co., Ltd.
  CEO
  

  ---

  

  Prof. Akiyoshi Takeno
  FiberCraze Co., Ltd.
  CTO
  
  Gifu University
  Department of Chemical and Biomolecular Engineering, Faculty of Engineering
  Professor
  

• Jan. 31, 2024 (Wed.) 14:45 ~ 16:45

  ASTEC/SURTECH Stage [East hall 3]
• SURTECH Special Exhibition Seminor

  Pre-Registration required

  
  

  ---

  

  14:45-15:15

  The introduction of activities for SDGs in SHIN-EI CHEMICAL INDUSTRY.

  Mr. Okubo Tatsuki
  SHIN-EI CHEMICAL INDUSTRY CO., LTD.
  

  ---

  

  15:30-16:00

  Various developments in plating technology from the encounter with plating on plastics.

  Prof. Hideo Honma
  Kanto Gakuin University
  Special Honorary Professor
  
  Materials and Surface Engineering Research Institute, Kanto Gakuin University
  Special Advisor
  

  ---

  

  16:15-16:45

  Trends in Dry Process Surface Treatment Technology

  Prof. Osamu Takai
  Kanto Gakuin University
  Surface and Materials Engineering Research Institute
  Special Adviser and Research Fellow
  

• Jan. 31, 2024 (Wed.) 15:00 ~ 15:30

  TCT Introducing Stage［East hall 3］
• International standards for AM quality assurance and case study for the certification

  Pre-Registration not required

  
  
  

  Ms. Nagano Chiyo
  TÜV SÜD Japan Ltd.
  AM Expert
  

• Jan. 31, 2024 (Wed.) 15:00 ~ 15:30

  Seeds & Needs Seminar A［East hall4］
• Experimental Records in the New Era of AI's "Browsing"

  Pre-Registration not required

  
  
  Mr. Tetsuya Nagata
  DAIKIN INDUSTRIES
  Data Science Group, Sales Department, Electronics Division
  

• Jan. 31, 2024 (Wed.) 15:00 ~ 17:00

  Main Theater［East hall 4］
• 【nano tech Special Symposium】Nanotechnology Accelerates Creation of Quantum Future Industries

  Pre-Registration required

  
  

  ---

  

  15:00-15:25

  Government and industry efforts towards social implementation of quantum technology

  Dr. Tetsuomi Sogawa
  NIPPON TELEGRAPH AND TELEPHONE CORPORATION
  Science and Core Technology Laboratory Group
  Senior Vice President, Basic and Advanced Research Principal
  

  ---

  

  15:25-15:50

  R&D and Cloud services of a superconducting quantum computer system at RIKEN

  Dr. Shinichi Yorozu
  RIKEN Center for Quantum Computing
  Deputy Director
  

  ---

  

  15:50-16:10

  Quantum vision & novel applications

  Mr. Tennin Yan
  QunaSys
  CEO
  

  ---

  

  16:10-16:35

  Bioimaging innovation by multi-element quantum materials

  Prof. Shigeki Kiyonaka
  Nagoya University
  Department of Biomolecular Engineering, Graduate School of Engineering
  Professor
  

  ---

  

  16:35-17:00

  Synthesis and characterization of diamond and boron nitride as quantum materials

  Dr. Takashi Taniguchi
  National Institute for Materials Science (NIMS)
  Fellow
  

• Jan. 31, 2024 (Wed.) 15:30 ~ 16:10

  Material Stage［East hall 5］
• Development of High-performance Marine Biodegradable Biomass Plastics

  Pre-Registration required

  
  
  

  Prof. Tadahisa Iwata
  The University of Tokyo
  Graduate School of Agricultural and Life Sciences
  Professor
  

• Jan. 31, 2024 (Wed.) 15:30 ~ 16:50

  Stage C［East hall 7］
• InterAqua organizers seminar

  Pre-Registration required

  
  

  ---

  

  15:30-16:10

  Contribute to Energy saving, Low maintenance and Noise reduction of blower for waste water treatment.
  We support Stable operation of waste water treatment by our New IoT technology.
  
  

  Mr. DAIKI YAMAURA
  ShinMaywa Industries, Ltd.
  

  ---

  

  16:10-16:50

  TR-COM Ready for plant monitoring with IoT

  Mr. Hiraki Keisuke
  Torishima pump mfg. co., ltd.
  Business development dept.
  General manager
  

• Jan. 31, 2024 (Wed.) 15:45 ~ 16:15

  TCT Introducing Stage［East hall 3］
• Latest Heat Treatment Developments for Critical AM Components

  Pre-Registration not required

  
  
  Mr. James Shipley
  Quintus Technologies
  

• Jan. 31, 2024 (Wed.) 15:45 ~ 16:15

  Seeds & Needs Seminar A［East hall4］
• Introducing the "Citrine Platform," which promotes materials informatics to achieve accelerated material development.

  Pre-Registration not required

  
  
  Mr. Takahiro Kaneko
  SCSK Corporation
  

• Jan. 31, 2024 (Wed.) 16:20 ~ 16:50

  Material Stage［East hall 5］
• Highly Sensitive & Rapid Oxidative Degradation Evaluation of Resin Materials by Chemiluminescence Method

  Pre-Registration required

  
  
  

  Mr. RYOTA SAMESHIMA
  Tohoku Electronic Industrial Co., Ltd.
  

• Feb. 1, 2024 (Thu.) 9:30 ~ 11:30

  Main Theater［East hall 4］
• 【nano tech Special Symposium】Power Semiconductors Contributing to Energy Saving and High Heat Dissipation Materials Supporting Them

  Pre-Registration required

  
  

  ---

  

  9:30-10:00

  Overview and Outlook of Power Semiconductors

  Prof. Wataru Saito
  Kyushu University
  Research Institute for Applied Mechanics
  Professor
  

  ---

  

  10:00-10:30

  Trends and Performance Evolution of the latest Power Semiconductor Modules

  Dr. Masayoshi Tarutani
  MITSUBISHI ELECTRIC CORPORATION
  POWER DEVICE WORKS
  Chief Engineer
  

  ---

  

  10:30-11:00

  Application Technology of High Heat Dissipation Material relates to Power Semiconductor Module

  Dr. Koji Hisayuki
  Resonac
  Head of Institute for Advanced Integrated Technology
  

  ---

  

  11:00-11:30

  Thermal Interface Materials for Power Module

  Mr. Akira Shimada
  Toray Industries
  Electronic & Imaging Materials Res. Labs.,
  Research Associate,
  

• Feb. 1, 2024 (Thu.) 10:00 ~ 16:35

  East 6 - Organizer's Office
• Smart Energy Seminar

  Pre-Registration required

  
  

• Feb. 1, 2024 (Thu.) 10:15 ~ 14:25

  Material Stage［East hall 5］
• WELL-BEING TECHNOLOGY

  Pre-Registration required

  
  

  ---

  

  10:15-10:55

  Vehicle "Kansei" function for Well-being.

  Dr. Kubo Kenta
  Mazda Motor
  Vehicle Development Div. Craftsmanship Development Gr.
  Technical Leader
  

  ---

  

  11:00-11:30

  Cutting-edge Well-being Tech

  Ph.D. Takao Kunii
  Linkers corporation
  Research Platform Business Division
  General Manager
  

  ---

  

  11:35-12:05

  WaaS Co-Creation Consortium as an Open Innovation Platform

  Mr. Hiroshi Irie
  EAST JAPAN RAILWAY COMPANY
  Innovation Strategy Headquarters
  Manager
  
  Well-being as a Service Co-Creation Consortium
  Executive director
  

  ---

  

  12:10-12:40

  Human Augmentation Research Contributing to Well-Being with the A-P Model

  Dr. Masaaki Mochimaru
  The National Institute of Advanced Industrial Science and Technology (AIST)
  Human Augmentation Research Center
  Fellow and Director of Human Augmentation Research Center
  

  ---

  

  12:55-13:25

  How to Design Well-Being Texhnology

  Prof. Takashi Maeno
  Graduate School of System Design and Management, Keio University
  

  ---

  

  13:30-14:25

  Aiming from Basic Research to Develop Products and Services Related to Well-Being

  Dr. Iwao WAGA
  JST Mirai-Program PO
  
  NEC Solution Innovators, Ltd.
  Senior Fellow
  
  Tohoku University School of Medicine
  Well-being Design Institute for Health
  Visiting Professor
  

  ---

  

  13:30-14:25

  Aiming from Basic Research to Develop Products and Services Related to Well-Being

  Prof. Rieko OSU
  Waseda University
  Faculty of Human Sciences
  Professor
  

  ---

  

  13:30-14:25

  Aiming from Basic Research to Develop Products and Services Related to Well-Being

  Prof. Atsushi SENJU
  Hamamatsu University School of Medicine
  Research Center for Child Mental Development
  Professor
  

  ---

  

  13:30-14:25

  Aiming from Basic Research to Develop Products and Services Related to Well-Being

  Prof. Kazunori TERADA
  Gifu University
  Faculty of Engineering, Department of Electrical, Electronic and Computer Engineering
  Professor
  

  ---

  

  13:30-14:25

  Aiming from Basic Research to Develop Products and Services Related to Well-Being

  Prof. Mihoko NIITSUMA
  Chuo University
  Faculty of Science and Engineering
  Professor
  

  ---

  

  13:30-14:25

  Aiming from Basic Research to Develop Products and Services Related to Well-Being

  Dr. Monami NISHIO
  National Center for Child Health and Development
  Department of Neonatology
  Research fellow
  

• Feb. 1, 2024 (Thu.) 10:15 ~ 16:25

  Convertech Stage［East hall 6］
• Decoration Technology

  Pre-Registration required

  
  

  ---

  

  10:15-10:55

  Latest Trends in Decorative Technologies and Future Prospects
  (Various Decorative Technologies to Generate High Added Value)
  

  Mr. Tatsuo Ito
  The Association of Decoration Technologies
  Director
  

  ---

  

  11:10-11:40

  3D Printing x Sustainable Materials: Texture Design in a New Dimension

  Mr. Hara Yuji
  ExtraBold inc.
  Founder, CEO/CTO
  

  ---

  

  11:55-12:25

  Euro Automotive interior and exterior CMF / HMI design & tech trend report 2024

  Mr. Yamamoto Yoshimasa
  PIXEL.A Corporation
  Surface design consulting
  CEO
  
  Material Design Research Association
  Representative Diector
  

  ---

  

  12:40-13:10

  CMF design that changes impression of product design.

  Ms. Haruna Tako
  HaKU Design Studio
  Product designer
  

  ---

  13:25-13:40

  [Exhibitor Short Presentation] Thermoforming Hardcoated film for 3D Decoration

  Mr. MASAAKI KUMAGAI
  AICA KOGYO Co., Ltd.
  

  ---

  13:40-13:55

  [Exhibitor Short Presentation] Pearl pigments and applications that take advantage of their characteristics

  Mr. Kazuhisa Azuma
  Merck Performance Materials G.K. Japan
  surface solutions
  

  ---

  13:55-14:10

  [Exhibitor Short Presentation] three-dimension decorative transfer technology

  Mr. Doi Yuma
  NIPPON KAKO TORYO CO.,LTD.
  HIGHLY FUNCTIONAL MATELRIALS DIVISION
  

  ---

  

  14:25-14:55

  Role of CMFG design for product

  Mr. Aoki Shogo
  GK Dynamics Inc.
  CMFG Design Dept.
  Operating Officer
  

  ---

  

  15:10-15:40

  Development of a decoration system as an alternative to automobile paint

  Mr. Yoshioka Hidehisa
  Taikisha
  

• Feb. 1, 2024 (Thu.) 10:20 ~ 11:15

  Seeds & Needs Seminar B［East hall 4］
• Startup＆Academia Pitch

  Pre-Registration not required

  
  

  ---

  10:20-10:35

  Kyushu University Miura Lab
  

  ---

  10:40-10:55

  Introduction to high-precision 3D nano/microscale thermal measurement technology

  Ph.D. Jun Hirotani
  Kyoto University - Thermal Measurement, Thermal Management Demand Research Unit
  

  ---

  11:00-11:15

  Reduction of XPS Measurement Time to Less Than One-Fifth with Spectral Super-Resolution Analysis for Accelerated Spectroscopic Measurement

  Prof. Shunta Harada
  Tokai Higher Education and Research System Nagoya University
  

• Feb. 1, 2024 (Thu.) 10:30 ~ 11:15

  Seeds & Needs Seminar C [East hall 5]
• Deeptech The Netherlands, Introduction of the Netherlands Pavilion

  Pre-Registration not required

  
  
  Mr. Eric Van Kooij
  Netherlands Embassy
  Innovation, Science and Technology
  Counsellor
  
  Netherlands Pavilion
  

• Feb. 1, 2024 (Thu.) 10:30 ~ 11:50

  ASTEC/SURTECH Stage [East hall 3]
• Surface Technology Conference【DAY2】

  Pre-Registration required

  
  

  ---

  

  10:30-11:10

  High-voltage performance of perovskite solar cells and film-type module development

  Prof. Tsutomu Miyasaka
  Toin University of Yokohama
  Project professor
  
  Peccell Technologies, Inc.
  CEO
  

  ---

  

  11:10-11:50

  Metasurface revolutionizing optical devices

  Ph.D. Takuo Tanaka
  RIKEN Center for Advanced Photonics
  Innovative Photon Manipulation Research Team
  Team Leader
  
  RIKEN Cluster for Pioneering Research
  Metamaterials Laboratory
  Chief Scientist
  
  Tokushima University
  Institute of Post-LED Photonics
  Special Appointed Professor
  

• Feb. 1, 2024 (Thu.) 10:30 ~ 12:00

  Stage B［East hall 8］
• Regional Decarbonization Seminar - Public-Private Partnerships to Promote Decarbonization in Leading Decarbonized Regions

  Pre-Registration required

  
  

  ---

  

  10:30-11:00

  Initiatives to address Regional Decarbonization

  Mr. Tomoyuki Izumi
  Ministry of The Environment
  Regional Decarbonization Projects Division, Minister's Secretariat
  Assistant director
  

  ---

  

  11:30-12:00

  IIDA environmental Brand Reborn Regenerate the power of tying with clean energy

  Mr. Susumu Kobayashi
  Iida City, Nagano Prefecture
  

• Feb. 1, 2024 (Thu.) 10:30 ~ 12:00

  Stage C［East hall 7］
• InterAqua organizers seminar

  Pre-Registration required

  
  

  ---

  

  10:30-11:15

  Features of the DDHRS-based microbubble generator (eco-Bubble®) and its use in fish and shellfish aquaculture and horticultural crop cultivation to dramatically improve production efficiency

  Prof. Tsutsumi Hiroaki
  Prefectural University of Kumamoto
  President
  

  ---

  

  11:15-12:00

  Achieving Water Sustainability with DuPont Multi-Tech Solutions

  Mr. Junichi Shirakawa
  DDP Specialty Products Japan K.K.
  DuPont Water Solutions, Water & Protection
  Sr. TS&D Specialist
  

• Feb. 1, 2024 (Thu.) 10:30 ~ 12:20

  Stage A［East hall 8］
• Keynote Speech at Energy Innovation Expo

  Pre-Registration required

  
  

  ---

  10:40-11:20

  The Green Transformation Policy

  Mr. Hiroo INOUE
  Agency for Natural Resources and Energy, METI
  The Energy Conservation and New Energy Department
  Director General of the Energy Conservation and New Energy Department
  

  ---

  

  11:20-11:50

  ENEX Keynote Lecture
  The future envisioned by the newly revised Energy Conservation Act

  Prof. Shin-ichi Tanabe
  Waseda University
  Department of Architecture
  Professor
  
  Waseda University
  Advanced Collaborative Research Organization for Smart Society (ACROSS)
  Dean
  

• Feb. 1, 2024 (Thu.) 10:30 ~ 13:00

  Stage D［East hall 7］
• Seminar on Utilization of Factory Waste Heat

  Pre-Registration required

  
  

  ---

  10:30-11:00

  Mr. Yasunori Uyama
  
  

  ---

  

  11:00-11:30

  The utilization of energy saving heat pump-based low-temperature evaporation and distillation devices.

  Mr. Miyoshi Toshiyuki
  KIMURA CHEMICAL PLANTS CO., LTD.
  Engineering Division.Tokyo Sales Dept.
  Manager
  

  ---

  

  11:30-12:00

  Factory Innovation! Energy Saving in Concentration Process by Heat Pump

  Ms. Saeka Suzuki
  Sasakura Engineering Co.,Ltd.
  Tokyo Water Treatment Marketing Sect.
  

  ---

  

  12:00-12:30

  Mr. Masanori Okamura
  DAIKIN INDUSTRIES, LTD.
  

  ---

  

  12:30-13:00

  Heat Pumps as Renewable Energy Heat Application Equipment
  Why do we need industrial heat pumps now?

  Mr. Masahito Yasuyuki
  HEAT PUMP & THERMAL STORAGE TECHNOLOGY CENTER OR JAPAN
  

• Feb. 1, 2024 (Thu.) 11:10 ~ 13:30

  TCT Main Stage［East hall 3］
• TCT Japan Conference Day 2【ADOPTION - APPLICATIONS】

  Pre-Registration required

  Simultaneous interpretation

  
  

  ---

  

  11:10-11:50

  Generative Design Optimization and Sustainable Additive Manufacturing for Automotive Applications

  Dr. Nanzhu Zhao
  Nissan Technical Center North America
  Technology Planning and Research Department
  Senior Researcher
  

  ---

  

  12:00-12:40

  Activities to realize the mass-production by additive manufacturing for automotive parts

  Mr. Tera Ryonosuke
  DENSO corporation
  Advanced Production Technology Div.
  General Manager
  

  ---

  

  12:50-13:30

  3D-printed artificial ventilator: ?-VENT

  Dr. Naoyuki Ishikita
  STONY & Co.
  CEO
  
  National Hospital Organization, Niigata National Hospital
  Division of Medical Device Innovation, Department of Clinical Research
  Director
  
  Kobe University Graduate School of Medicine
  Center for Advanced Medical Engineering Research &Development (CAMED)
  Associate Professor
  

• Feb. 1, 2024 (Thu.) 11:15 ~ 11:45

  TCT Introducing Stage［East hall 3］
• Introducing Cubicure’s 'Hot Lithography' technology: 3D printing for industrial applications

  Pre-Registration not required

  
  
  

  Mr. Sebastian Kolmanz
  Cubicure GmbH
  Sales & Business Development
  Sales Manager Japan
  

• Feb. 1, 2024 (Thu.) 11:15 ~ 11:45

  Seeds & Needs Seminar A［East hall4］
• Study of the effects of BARC and BEAMER correction to the submicron structure resolution fabricated by Maskless Aligner, DWL66+

  Pre-Registration not required

  
  
  Dr. Tithimanan Srimongkon
  Heidelberg Instruments
  

• Feb. 1, 2024 (Thu.) 11:30 ~ 12:15

  Seeds & Needs Seminar C [East hall 5]
• Towards a circular economy: Initiatives of research base for organic and bio-based materials, AIST Chugoku

  Pre-Registration not required

  
  

  ---

  

  11:30-11:45

  Overview and strategy of the Research Base for Organic and Bio-based Materials

  Dr. Hiroaki Sato
  AIST Chugoku, National Institute of Advanced Industrial Science and Technology (AIST)
  Director-General
  Research Institute for Sustainable Chemistry
  Director of the Institute
  

  ---

  

  11:45-12:00

  Process Informatics for Development of High-Performance Polymer Composite Materials

  Dr. Keita Sakakibara
  National Institute of Advanced Industrial Science and Technology (AIST)
  Cellulose Materials Group, Research Institute for Sustainable Chemistry
  Group Leader
  

  ---

  

  12:00-12:15

  Material Diagnosis towards Resource Circulation of Plastics

  Dr. Hirohmi Watanbe
  National Institute of Advanced Industrial Science and Technology (AIST)
  Organic Materials Diagnosis Group, Research Institute for Sustainable Chemistry
  Senior Researcher
  

• Feb. 1, 2024 (Thu.) 11:30 ~ 12:15

  Seeds & Needs Seminar B［East hall 4］
• [NEW] Example of nano-dispersion using the latest bead mill for high-viscosity, high-flow circulation operation

  Pre-Registration not required

  
  
  Mr. Nakajima Tsubasa
  Ashizawa Finetech
  

• Feb. 1, 2024 (Thu.) 11:45 ~ 12:45

  Main Theater［East hall 4］
• 【nano tech Special Symposium】Nanomaterial-based Drug Discovery and Therapy

  Pre-Registration required

  
  

  ---

  

  11:45-12:15

  Intracellular environment-responsive lipid like material (ssPalm) as a technology to accelerate the RNA-based drug discovery

  Prof. Hidetaka Akita
  Tohoku University
  Graduate School of Pharmaceutical Sciences,
  Professor
  

  ---

  

  12:15-12:45

  Immunoregulation by Designer Exosomes and its Quality Control

  Prof. Rikinari Hanayama
  Kanazawa University
  WPI Nano Life Science Institute
  Professor
  

• Feb. 1, 2024 (Thu.) 12:00 ~ 12:30

  Seeds & Needs Seminar A［East hall4］
• Piezoelectric energy harvesting from AC current-carrying wire

  Pre-Registration not required

  
  
  Dr. Shuichi Murakami
  Osaka Research Institute of Industrial Science and Technology
  Research Division of Electric and Mechanical Systems
  Head, Electronic Devices Laboratory Lab.
  

• Feb. 1, 2024 (Thu.) 12:15 ~ 16:00

  ASTEC/SURTECH Stage [East hall 3]
• ASTEC/SURTECH Exhibitor Seminor

  Pre-Registration not required

  
  

  ---

  

  12:15-12:45

  MSE

  Ph.D. Toru Matsubara
  PALMESO CO., LTD.
  

  ---

  13:00-13:30

  New tribology testers and the evaluation technology for EV development

  Mr. Takuto Kunii
  Rtec-Instruments K.K.
  

  ---

  

  13:45-14:30

  Coatings: functional performance lab scale testing

  Mr. Patzer Gregor
  Optimol Instruments Prüftechnik GmbH
  General manager
  

  ---

  

  14:45-15:15

  Container-in small wastewater treatment equipment - Quest for space saving and installation cost reduction -

  Mr. Ichiro Morihiro
  Kaikoh Co.,Ltd
  President
  

  ---

  

  15:30-16:00

  Environmentally friendly surface treatment technology using non-cyanide alloy plating and Elecoat process

  Mr. SHINICHI TSUGAFUNE
  SHIMIZU CO.,LTD.
  Engineering Department
  Lead engineer
  

• Feb. 1, 2024 (Thu.) 12:30 ~ 13:00

  Stage C［East hall 7］
• 【InterAqua】Exhibitor Presentation

  Pre-Registration not required

  
  

  ---

  12:30-13:00

  Adapt DX solutions through Engineering, Construction and Asset Management to improve Water business

  Mr. Shigeki Yamauchi
  Hexagon
  

• Feb. 1, 2024 (Thu.) 12:30 ~ 13:15

  Seeds & Needs Seminar B［East hall 4］
• High-throughput metal bulk printing and evaluation system and its materials process informatics for aircraft engine material development.

  Pre-Registration not required

  
  

  ---

  

  12:30-13:15

  High-throughput metal bulk printing and evaluation system and its materials process informatics for aircraft engine material development.

  Dr. HIROSE Shingo
  National Institute of Advanced Industrial Science and Technology
  

• Feb. 1, 2024 (Thu.) 12:30 ~ 13:15

  Seeds & Needs Seminar C [East hall 5]
• nano cellulose japan seminars

  Pre-Registration not required

  
  

  ---

  12:30-13:15

  The history of cellulose nanofibers (CNF) and their future application in the battery business
  is unraveled through intellectual property information.

  Mr. Nakayama Hidehiko
  Chuo Kogaku Shuppan Co., Ltd.
  

• Feb. 1, 2024 (Thu.) 12:45 ~ 13:15

  TCT Introducing Stage［East hall 3］
• MarkForged's latest 3D printers, materials and services

  Pre-Registration not required

  
  
  

  Ph.D. Thomas H. Pang
  JAPAN 3D PRINTER Co.,Ltd
  
  Markforged・Japan Co.,Ltd
  

• Feb. 1, 2024 (Thu.) 12:45 ~ 13:15

  Seeds & Needs Seminar A［East hall4］
• Innovation of module design by MEMS design system "CR-8000 MEMS Designer" and MEMS/Package/PCB coordination

  Pre-Registration not required

  
  
  Mr. Kobayashi Yoshikazu
  Zuken Inc.
  

• Feb. 1, 2024 (Thu.) 13:00 ~ 13:45

  Main Theater［East hall 4］
• Development of nanoscale materials using molecular simulation and machine learning

  Pre-Registration not required

  
  
  Ph.D. Morisato Tsuguo
  Schrödinger K.K.
  Senior Director, Materials Science
  

• Feb. 1, 2024 (Thu.) 13:00 ~ 14:00

  Stage A［East hall 8］
• 　2050 Targets Aimed at by Expanding the Introduction of Non-fossil Energy and Optimizing Energy Use ~Industrial and Business Sector Initiatives~

  Pre-Registration required

  
  

  ---

  13:00-13:30

  "Theoretical Value based Energy" ~Minimization of Energy to Achieve Ffactory Carbon Neutrality~

  Mr. Masakatsu Takahashi
  YAMAHA MOTOR CO., LTD.
  Environment Planning Group, Plant Engineering Division, Manufacturing Center
  Senior Supervisor
  

  ---

  13:30-14:00

  Aeon’s energy saving efforts.

  Mr. Tsusue Kouji
  AEON Co.,Ltd.
  Risk Management Dept.
  General Manager
  

• Feb. 1, 2024 (Thu.) 13:10 ~ 13:40

  Stage B［East hall 8］
• 【Offshore Tech Japan】Exhibitor Presentation

  Pre-Registration not required

  
  

• Feb. 1, 2024 (Thu.) 13:20 ~ 13:50

  Stage C［East hall 7］
• 【InterAqua】Exhibitor Presentation

  Pre-Registration not required

  
  

  ---

  13:20-13:50

  A sustainable future led by Team Water Shiga x Water treatment technology
  - Shiga Water Environment Business Promotion Forum and member companies taking on the challenge of water environment business -

  Ms. Misato Yamanaka
  Shiga Prefecture
  Commerce and Industries Policies Division, Department of Commerce, Industry, Tourism and Labor
  

  ---

  13:20-13:50

  A sustainable future led by Team Water Shiga x Water treatment technology
  - Shiga Water Environment Business Promotion Forum and member companies taking on the challenge of water environment business -

  Mr. Yoshinobu Odagaki
  TAIYOSANGYO CO.,LTD.
  

  ---

  13:20-13:50

  A sustainable future led by Team Water Shiga x Water treatment technology
  - Shiga Water Environment Business Promotion Forum and member companies taking on the challenge of water environment business -

  Mr. Aoyama Akira
  WEF Institute of Technology Inc.
  CEO
  

• Feb. 1, 2024 (Thu.) 13:20 ~ 14:05

  Stage D［East hall 7］
• InterAqua organizers seminar

  Pre-Registration required

  
  

  ---

  

  13:20-14:05

  A porous carbon material Triporous derived from rice husks for water purification and its contribution to SDGs

  Dr. Seiichiro Tabata
  Sony Intellectual Property Services Corporation
  Triporous Team
  

• Feb. 1, 2024 (Thu.) 13:30 ~ 14:00

  TCT Introducing Stage［East hall 3］
• The latest denture device using 3D metal printing technology

  Pre-Registration not required

  
  
  Mr. Yuya AbeAbe
  Sanwa Dental Co.,LTD.
  

• Feb. 1, 2024 (Thu.) 13:30 ~ 14:00

  Seeds & Needs Seminar A［East hall4］
• Introduction to Research and Talent Fostering of Nanoscience and Nanotechnology, Osaka University

  Pre-Registration not required

  
  
  Prof. Minoru Okamoto
  Advanced Research Infrastructure for Materials and Nanotechnology in Japan, Osaka University
  

• Feb. 1, 2024 (Thu.) 13:30 ~ 14:15

  Seeds & Needs Seminar B［East hall 4］
• Frontiers of Process Informatics -Synthesis and Manufacturing Processes of Functional Materials-

  Pre-Registration not required

  
  

  ---

  

  13:30-14:15

  a

  Dr. Toru Yamaguchi
  TS Technology
  

  ---

  13:30-14:15

  a

  Dr. KIMURA Teiichi
  JFCC
  

• Feb. 1, 2024 (Thu.) 13:30 ~ 14:30

  Seeds & Needs Seminar C [East hall 5]
• TIA MEMS Winter Seminar

  Pre-Registration required

  
  

  ---

  

  13:30-14:00

  Development of a tactile remote transmission system using ultra-thin MEMS haptic devices

  Dr. Yusuke Takei
  National Institute of Advanced Industrial Science and Technology (AIST)
  Sensing System Research Center
  

  ---

  

  14:00-14:30

  A new technology to visualize the tactile sensation of fingertips: Silicon MEMS Nano-Tactile Sensors

  Prof. Hidekuni Takao
  Kagawa University
  Faculty of Engineering and Design
  Professor
  

• Feb. 1, 2024 (Thu.) 13:30 ~ 16:00

  Surface Finishing Seminar [East hall 3 Entrance]
• Surface Technology Association Subcommittee Lectur

  Pre-Registration not required

  
  

  ---

  

  13:30-14:15

  Hard Trivalent Chromium Plating - Present and Future

  Mr. Masafumi Nozaki
  OKUNO CHEMICAL INDUSTRIES CO.,LTD.
  

  ---

  14:25-15:10

  The problems of plating wastewater treatment caused by the tight of wastewater regulations of hexavalent chromium.
  

  Mr. Yukio Kosaka
  Tokyo Metropolitan Industrial Technology Research Institute
  

• Feb. 1, 2024 (Thu.) 14:00 ~ 14:15

  Main Theater［East hall 4］
• Discover What's Possible! Multimodal AI Technology - Showcasing the Latest Achievements

  Pre-Registration not required

  
  
  Dr. Shun Muroga
  National Institute of Advanced Industrial Science and Technology (AIST)
  Nano Carbon Device Research Center
  

• Feb. 1, 2024 (Thu.) 14:00 ~ 16:15

  TCT Main Stage［East hall 3］
• Japanese Society of Additive Manufacturing × TCT Japan Seminar

  Pre-Registration required

  
  

  ---

  14:00-14:05

  Greeting

  Mr. Iinuma Masaya
  Ministry of Economy, Trade and Industry
  Manufacturing Industries Bureau.Machine Parts&Tooling Industries Office.
  Deputy Director
  

  ---

  

  14:05-14:55

  Enhancement of Performance in Additive Manufacturing in High Gravitational Fields

  Dr. Ryo Koike
  Keio University
  Faculty of Science and Technology, Department of System Design Engineering
  Assistant Professor
  

  ---

  

  14:55-15:35

  "One-piece molding Induction Heating Coil: AM Coil ®" ~Won the 2023 "Super" Manufacturing Parts Award~

  Mr. YUTAKA SHIMOMURA
  TKE Co.,Ltd.
  PRESIDENT
  
  TAKAO KOGYO Co.,Ltd.
  PRESIDENT
  

  ---

  

  15:35-16:15

  Japan's AM technology development and practical examples, competitive with the rest of the world.

  Mr. Sawakoshi Toshiyuki
  Japanese Society of Additive Manufacturing
  

  ---

  

  15:35-16:15

  Japan's AM technology development and practical examples, competitive with the rest of the world.

  Mr. Koike Ryo
  Keio University.
  

  ---

  

  15:35-16:15

  Japan's AM technology development and practical examples, competitive with the rest of the world.

  Mr. Shimokura Yutaka
  TKE Co., Ltd.
  

  ---

  

  15:35-16:15

  Japan's AM technology development and practical examples, competitive with the rest of the world.

  Mr. Hakamada Tomoaki
  ORIX Rentec Corporation.
  

• Feb. 1, 2024 (Thu.) 14:00 ~ 16:50

  TFT Building West Wing 2F TFT Hall
• Seminar on Decarbonization at factories and workplaces

  Pre-Registration required

  
  

• Feb. 1, 2024 (Thu.) 14:00 ~ 17:00

  Stage B［East hall 8］
• Marine Robots and Core Technologies

  Pre-Registration required

  
  

  ---

  

  14:00-14:45

  The Basic Plan on Ocean Policy -Focused on the Strategy for industrialization of Autonomous Underwater Vehicles (AUV Strategy) -

  Mr. Yoshio Kawaguchi
  Cabinet Office, Government of JAPAN
  National Ocean Policy Secretariat
  Director for Research and Development, and Human Resource Development
  

  ---

  

  14:45-15:30

  Keynote Speech 2: Marine Robot Development in SIP - Achievements and Future Prospects -

  Dr. Toshifumi Fujiwara
  National Maritime Research Institute, National Institute of Maritime, Port and Aviation Technology
  Managing Director for Research Affairs
  

  ---

  

  15:30-16:00

  Underwater acoustics for ROV, AUV and ASV

  Prof. Akira Asada
  The University of Tokyo
  Professor Emeritus
  

  ---

  

  16:00-16:30

  Mr. Morimoto
  
  

  ---

  

  16:30-17:00

  Underwater optical wireless technologies for ocean and underwater visualization ~ Underwater Fusion Sensor and underwater optical wireless communication technology ~

  Dr. Ken-Ichi Suzuki
  Trimatiz Limited
  Technology Design Group
  Director
  

• Feb. 1, 2024 (Thu.) 14:10 ~ 14:40

  Stage C［East hall 7］
• 【RENEWABLE ENERGY 2023】Exhibitor Presentation

  Pre-Registration not required

  
  

  ---

  14:10-14:40

  The new type of trash removal device that solves the problems of small
  hydropower generation and contributes to improving profitability

  Mr. Tatsuo Makishi
  Nippon Engineer Co.Ltd.
  President
  

• Feb. 1, 2024 (Thu.) 14:15 ~ 14:30

  Main Theater［East hall 4］
• Ceramics Automated Experiments and Process Informatics Using Robot Arms

  Pre-Registration not required

  
  
  Dr. Yuki Yamaguchi
  National Institute of Advanced Industrial Science and Technology (AIST)
  Innovative Functional Materials Research Institute
  

• Feb. 1, 2024 (Thu.) 14:15 ~ 14:45

  TCT Introducing Stage［East hall 3］
• Towards practical use of AM breakthrough. - Introduction of the latest laser wire metal 3D printer "ADDiTEC"

  Pre-Registration not required

  
  
  

  Mr. Ono Yushi
  TAIYO NIPPON SANSO Corporation
  

• Feb. 1, 2024 (Thu.) 14:15 ~ 14:45

  Seeds & Needs Seminar A［East hall4］
• What is the use of materials informatics in plastic compounding materials?

  Pre-Registration not required

  
  
  Mr. Shuji Oyama
  MI-6 Ltd.
  

• Feb. 1, 2024 (Thu.) 14:20 ~ 15:20

  Stage A［East hall 8］
• 2050 Targets Aimed at by Expanding the Introduction of Non-fossil Energy and Optimizing Energy Use ~Solution Services for the Electricity and Gas Industry~.　

  Pre-Registration required

  
  

  ---

  

  14:20-14:50

  The Action of Demand Side Response

  Mr. Yuuji Kamei
  KYUSHU ELECTRIC POWER CO.,INC.
  

  ---

  

  14:50-15:20

  The development of Energy Management System "Energy Brain" by using remote control AI

  Ms. Chiaki Takata
  Daigas Energy Co., Ltd.
  

• Feb. 1, 2024 (Thu.) 14:30 ~ 14:45

  Main Theater［East hall 4］
• Data-Driven Materials Design Technology Utilization Promotion Consortium - Secure Computing and Its Applications

  Pre-Registration not required

  
  
  Dr. Takashi Tokizaki
  National Institute of Advanced Industrial Science and Technology (AIST)
  Research Center for Computational Design of Advanced Functional Materials
  

• Feb. 1, 2024 (Thu.) 14:30 ~ 15:15

  Seeds & Needs Seminar B［East hall 4］
• CNF

  Pre-Registration not required

  
  

  ---

  

  14:30-15:15

  CNF

  Prof. yao shigeru
  
  

• Feb. 1, 2024 (Thu.) 14:30 ~ 16:50

  Stage D［East hall 7］
• Earth Boiling and Hurry Decarbonization

  Pre-Registration required

  
  

  ---

  14:30-15:05

  Trends related to Net-Zero/GX and Efforts to maximize the introduction of renewable energy

  Mr. Yuki Izumi
  Ministry of the Environment
  

  ---

  

  15:05-15:40

  Trends in Sustainable Aviation Fuel(SAF) and Japan's approach

  Mr. Akirohiro Higashida
  Ministry of Land, Infrastructure, Transport and Tourism Japan
  

  ---

  

  15:40-16:15

  Challenges for a Low Carbon Society - Biomass Research in Southeast Asia and its Social Implementation

  Mr. Akihiko Kosugi
  Japan International Research Center for Agricultural Sciences (JIRCAS)
  Biological Resources and Post-harvest Division
  Project Leader
  

  ---

  16:15-16:50

  Ms. Yukiko Imada
  
  

• Feb. 1, 2024 (Thu.) 14:40 ~ 15:10

  Material Stage［East hall 5］
• Functional Biomass Materials for Achieving the SDGs

  Pre-Registration required

  
  
  

  Mr. Shunsuke Ando
  SHIKOKU CHEMICALS CORPORATION
  Advanced Materials Team, Research and development of chemical products Division
  

• Feb. 1, 2024 (Thu.) 14:45 ~ 15:45

  Seeds & Needs Seminar C [East hall 5]
• R & D National Projects Update Seminar/ SSN Study Group Public Symposium

  Pre-Registration required

  
  

  ---

  

  14:45-15:15

  Development of Si based infrared photodetector

  Prof. Tetsuo Kan
  University of Electro-Communications
  Professor
  

  ---

  

  15:15-15:45

  R&D of blood component monitoring devices
  -TANITA's Corporate Vision and Product Development Direction

  TANITA corporation
  

• Feb. 1, 2024 (Thu.) 14:45 ~ 15:45

  WELL-TECH Stage［East hall 5］
• TALK SESSION

  Pre-Registration required

  
  
  Prof. Takashi Maeno
  

  Guest

  Graduate School of System Design and Management, Keio University
  

  ---

  Sho Takano
  

  Commentator

  Fukui Prefectural University
  

  ---

  Dr. Junji Watanabe
  

  Commentator

  NTT Communication Science Laboratories
  

• Feb. 1, 2024 (Thu.) 15:00 ~ 15:30

  TCT Introducing Stage［East hall 3］
• Introduction to the features of the AMCM, the customized EOS machines

  Pre-Registration not required

  
  
  

  Mr. Josef Ludwig Weilhammer
  AMCM GmbH
  Technical Product Manager / Sales Manager
  

• Feb. 1, 2024 (Thu.) 15:00 ~ 15:30

  Seeds & Needs Seminar A［East hall4］
• HORIBA's latest analytical technologies! Introduction of spectroscopic analysis, elemental analysis, and particle measurement for batteries, carbon, and semiconductor materials.

  Pre-Registration not required

  
  
  Mr. Masahiro Oguchi
  HORIBA, Ltd.
  

• Feb. 1, 2024 (Thu.) 15:00 ~ 17:00

  Main Theater［East hall 4］
• 【nano tech Special Symposium】How MI has changed Nanomaterials Development -Current Issues and Future Prospects-

  Pre-Registration required

  
  

  ---

  

  15:00-15:40

  Applications and Challenges in Computational Materials Development using Atomistic Simulator Matlantis

  Mr. Akihiro Nagoya
  Preferred Computational Chemistry
  Technical Sales & Customer Success Department,
  Senior Manager
  

  ---

  

  15:40-16:20

  Materials Informatics Applications on Nanomaterials

  Mr. Mitsuru Irie
  MI-6 Ltd.
  Chief Operating Officer
  

  ---

  

  16:20-17:00

  New trend in MI for nano-materials development - From finding new substances toward optimization of materials structure and processes design

  Prof. Tadafumi Adschiri
  Tohoku University
  Advanced Institute for Materials Research (WPI-AIMR)
  Research professor/ Emeritus professor
  

• Feb. 1, 2024 (Thu.) 15:15 ~ 16:30

  Stage C［East hall 7］
• InterAqua organizers seminar

  Pre-Registration required

  
  

• Feb. 1, 2024 (Thu.) 15:25 ~ 15:55

  Material Stage［East hall 5］
• "Titanium and Zirconium Organometallics: Fundamental Traits and Practical Implementations

  Pre-Registration required

  
  
  

  Mr. Hashimoto Ryuji
  Matsumoto Fine Chemical Co.,LTD
  

• Feb. 1, 2024 (Thu.) 15:30 ~ 16:15

  Seeds & Needs Seminar B［East hall 4］
• Next-generation applications opened up by high-concentration, high-purity ozone

  Pre-Registration not required

  
  
  Mr. Shino Tatsunori
  MEIDEN NANOPROCESS INNOVATIONS, INC.
  

• Feb. 1, 2024 (Thu.) 15:40 ~ 16:40

  Stage A［East hall 8］
• Targets for 2050 to be achieved by expanding the introduction of non-fossil energy and optimizing energy use ~Renewable and new energy related technologies and case studies~　

  Pre-Registration required

  
  

  ---

  15:40-16:10

  Challenge to zero carbon of West Japan Railway Company

  Mr. Masanobu Kajihara
  West Japan Railway Company Co., Ltd.
  Railway operation headquarters, Promotion of environmental protection(planning)
  Chief Manager
  

  ---

  

  16:10-16:40

  Green hydrogen production and supply chain development using geothermal energy

  Mr. Moriya Kajiki
  OBAYASHI Corporation
  Green Energy Division
  

• Feb. 1, 2024 (Thu.) 15:45 ~ 16:15

  TCT Introducing Stage［East hall 3］
• L-PBF Method for Water Atomized Powder Fabrication and Powder Evaluation Technology ~Possibility of Cost Reduction in Mass Production by Application of MIM Powder~.

  Pre-Registration not required

  
  
  

  Prof. Akihiko Yanagitani
  Hyogo Metal belt consortium
  
  University of Hyogo
  

  ---

  

  Mr. Ryoichi Kojima
  Malvern Panalytical a division of Spectris Co.,Ltd
  Sales Engineer
  

• Feb. 1, 2024 (Thu.) 15:45 ~ 16:15

  Seeds & Needs Seminar A［East hall4］
• Examples of Microscale Simulation in the High-Performance Materials Domain, Targeting 3D Printing (Layered Fabrication), Metal Foams, and Composite Materials.

  Pre-Registration not required

  
  
  Mr. Tsubasa Ojima
  SCSK Corporation
  

• Feb. 1, 2024 (Thu.) 16:00 ~ 16:40

  Seeds & Needs Seminar C [East hall 5]
• MEMS Industry Forum

  Pre-Registration required

  
  

  ---

  

  16:00-16:40

  Survey report on trends in Japanese MEMS operators

  Mr. Hidekazu Hasegawa
  Micromachine Center
  Executive Director
  

• Feb. 1, 2024 (Thu.) 16:00 ~ 17:00

  WELL-TECH Stage［East hall 5］
• [WELL-BEING] Networking Party

  
  

• Feb. 1, 2024 (Thu.) 16:10 ~ 16:40

  Material Stage［East hall 5］
• Research and business development of AIST group for Well-being society

  Pre-Registration required

  
  
  

  Dr. Kitazaki Satoshi
  AIST Solutions Company
  Producer, Well-being project
  

• Feb. 1, 2024 (Thu.) 16:30 ~ 17:00

  Seeds & Needs Seminar B［East hall 4］
• Cutting edge of Nanotechnologies, AI and Quantum tech from Canada.

  Pre-Registration not required

  
  
  Ms. Janice Warkentin
  Deep Tech Canada
  

• Feb. 2, 2024 (Fri.) 9:30 ~ 13:45

  Main Theater［East hall 4］
• ACS Publications Summit

  Pre-Registration required

  
  

• Feb. 2, 2024 (Fri.) 10:15 ~ 11:15

  Stage C［East hall 7］
• Energy Conservation Law Revision Seminar

  Pre-Registration required

  
  

  ---

  

  10:15-10:45

  The Future of Energy Demand Side Policies

  Mr. Koshi Kimura
  Ministry of Economy, Trade and Industry
  

• Feb. 2, 2024 (Fri.) 10:15 ~ 15:30

  TCT Main Stage［East hall 3］
• TCT Japan Conference Day 3【OPTIMIZATION - BREAKTHROUGHS AND FUTURE OPPORTUNITIES】

  Pre-Registration required

  
  

  ---

  

  10:15-11:00

  A Practical Guide to 3D Printing

  Mr. Kiyoshi Yamaguchi
  JAPAN 3D PRINTING INDUSTRIAL TECHNOLOGY ASSOCIATION
  Researcher
  

  ---

  

  11:10-11:40

  Recent trends of metal Additive Manufacturing and development status of the Japan-made MEX process project

  Prof. Hideki Kyogoku
  Kindai University
  Fundamental Technology for Next Generation Research Institute
  Professor
  

  ---

  

  11:50-12:20

  Structural Design of Functional Structures Based on Topology Optimization

  Prof. Shinji Nishiwaki
  Kyoto University
  Department of Mechanical Engineering and Science Graduate School of Engineering
  Professor
  

  ---

  

  12:30-13:00

  Exploring Applications and Future Frontiers of Plastic laser Sintering

  Prof. Toshiki Niino
  the University of Tokyo
  Institute of Industrial Science
  Professor
  

  ---

  

  13:40-14:10

  3D printing of composite materials

  Prof. Ryosuke Matsuzaki
  Tokyo University of Science
  Department of Mechanical and Aerospace Engineering
  Professor
  

  ---

  

  14:20-14:50

  Stereolithographic Additive Manufacturing

  Prof. Soshu Kirihara
  Osaka University
  Joining and Welding Research Institute
  Professor
  

  ---

  

  15:00-15:30

  3D Printing Market and Technology Trend in US and Europe

  Mr. Hideaki Oba
  Japan 3D Printing Industrial Technology Association
  

• Feb. 2, 2024 (Fri.) 10:20 ~ 12:30

  Convertech Stage［East hall 6］
• Coming Soon

  Pre-Registration required

  
  

  ---

  

  10:20-11:00

  Coating and Drying Theories, Simulation and Experimental research for Energy Devices trends

  Mr. Nobuo Hamamoto
  AndanTEC
  President
  

  ---

  

  11:15-11:45

  Overview of Perovskite Solar Cells (Process Technology, Materials, etc.)

  Dr. Masahide Kawaraya
  Kanagawa Institute of Industrial Science and Technology
  Kawasaki Technical Support Department
  Science and Technology Coordinator
  

  ---

  

  12:00-12:30

  Corona treatment technology used in energy devices

  Mr. Yutaka Tamura
  KASUGA DENKI,INC.
  CORONA ENGINEERING DEPARTMENT
  BOARD OF DIRECTOR
  

• Feb. 2, 2024 (Fri.) 10:20 ~ 12:40

  Material Stage［East hall 5］
• Data-Driven R&D Seminar

  Pre-Registration required

  
  

  ---

  

  10:20-11:00

  Global Trends and Future Prospects for Digital Laboratories

  Prof. Taro Hitosugi
  The University of Tokyo
  

  ---

  

  11:15-11:45

  Expanding New Application Discovery through Generative AI

  Dr. Shiho Mukaida
  Mitsui Chemicals, Inc.
  Digital Transformation Planning & Coodination Division, Digital Transformation Sector
  Teams Leader
  
  Shinshu University
  Faculty of Engineering
  Specially Appointed Associate professor
  
  Osaka University
  Graduate School of Engineering Science
  Invited Professor
  

  ---

  

  12:00-12:40

  Robotic experiments integrated with AI algorithm accelerate autonomous experiments for electrolyte materials of rechargeable batteries

  Dr. Shoichi Matsuda
  National Institute for Materials Science
  

• Feb. 2, 2024 (Fri.) 10:30 ~ 11:00

  TCT Introducing Stage［East hall 3］
• Introduction/ Update of EOS’s innovations 1) Smart Fusion 2) Advanced Processes 3) New Light Engines

  Pre-Registration not required

  
  
  

  Mr. Michael Jan Galba
  EOS GmbH
  Principal Engineer - Advanced Metal Solutions
  

• Feb. 2, 2024 (Fri.) 10:30 ~ 11:30

  Stage D［East hall 7］
• InterAqua organizers seminar

  Pre-Registration required

  
  

  ---

  

  10:30-11:00

  From water risk assessment to countermeasures and information disclosure

  Mr. Yuu TANAKA
  KURITA WATER INDUSTRIES LTD.
  New Business Development Section Open Innovation Department Inovation Division
  

  ---

  11:00-11:30

  Kurita's environmental solutions for realizing a sustainable society

  Mr. TAKUYA FUJIHIRA
  Kurita Water Industries
  Innovation Division Solution Development
  

• Feb. 2, 2024 (Fri.) 10:30 ~ 12:00

  Stage A［East hall 8］
• Initiatives on DER for Smart Resilient Networks and Future Vision of Power System with DER Deployment

  Pre-Registration required

  
  

  ---

  10:30-10:40

  Introduction to Smart Resilience Network

  Mr. Naoto Hirata
  SmartResilienceNetwork
  

  ---

  10:40-11:00

  Activity of WG1

  Mr. Noboru Araki
  SmartResilienceNetwork/TNcross
  

  ---

  11:00-11:20

  Activity of WG2

  Mr. Masahiro Minami
  Smart Resilience Network/Kansai Transmission and Distribution
  

  ---

  11:20-12:00

  Future vision of Kansai Transmission and Distribution

  Mr. Masahiro Minami
  Kansai Transmission and Distribution
  Future T&D Laboratory
  Manager
  

• Feb. 2, 2024 (Fri.) 10:30 ~ 12:00

  Stage B［East hall 8］
• Offshore Wind Power Generation by Municipalities

  Pre-Registration required

  
  

  ---

  

  10:30-11:00

  Mr. Seiji Matsuo
  Nagasaki Prefectural Government
  

  ---

  

  11:00-11:30

  Introducrion of the current situation of offshore wind power generation off the coast of Karatsu City and Saga Energy Tourism

  Ms. Mari Enjouji
  Saga prefecture
  Department of Industry and labor
  section chief
  

  ---

  11:30-12:00

  Mr. Takashi Hakkaku
  
  

• Feb. 2, 2024 (Fri.) 10:30 ~ 12:15

  Seeds & Needs Seminar B［East hall 4］
• Nanocarbon Special Lecture

  Nanocarbon Exhibitor Seminar

  Pre-Registration not required

  
  

  ---

  

  10:30-11:30

  Single-walled carbon nanotubes and one-dimensional heterostructure

  Prof. Maruyama Shigeo
  The University of Tokyo
  School of Engineering
  Professor
  

  ---

  

  11:30-12:15

  Artificial Photosynthesis Systems Based on Carbon Nanotube Photocatalysts

  Prof. TAKAGUCHI Yutaka
  University of Toyama
  Department of Materials Design and Engineering
  

  ---

  12:15-12:30

  About GSI Creos' evolving CSCNT elemental technology and commercialization

  GSI Creos Corporation
  Nanotechnology Development Dept.
  

  ---

  12:30-12:45

  SWCNT defibration only at one pass at 100 Mpa through 0.09mm nozzle with Beryu system with DMR system. Any SWCNT and SWCNT in any solvent can be dispersed without special premixing treatment.

  Mr. Nakano Mitsuru
  Beryu corp
  President
  

• Feb. 2, 2024 (Fri.) 10:30 ~ 12:25

  WELL-TECH Stage［East hall 5］
• WELL-BEING TECHNOLOGY Exhibitors' Pitch Presentations

  Pre-Registration required

  
  

• Feb. 2, 2024 (Fri.) 10:30 ~ 12:30

  ASTEC/SURTECH Stage [East hall 3]
• ASTEC Tribology Seminor

  Pre-Registration required

  
  

  ---

  10:30-12:30

  The latest trends in tribology technology that contributes to energy conservation and high added value of products

  Prof. Shinya Sasaki
  Tokyo University of Science
  

  ---

  10:30-12:30

  The latest trends in tribology technology that contributes to energy conservation and high added value of products

  Discussion
  

• Feb. 2, 2024 (Fri.) 10:30 ~ 13:00

  Surface Finishing Seminar [East hall 3 Entrance]
• Surface Technology Association Subcommittee Lecture

  Pre-Registration not required

  
  

  ---

  11:20-12:05

  Mr. Eitaro Yukutake
  Industrial Technology Innovation Center Of Ibaraki Prefecture
  

  ---

  

  12:15-13:00

  Surface preparation and adhesive bonding

  Dr. Haruhisa Akiyama
  National Institute of Advanced Industrial Science and Technology
  Nanomaterial Reserch Institute
  Group leader
  

• Feb. 2, 2024 (Fri.) 11:15 ~ 11:45

  TCT Introducing Stage［East hall 3］
• AM Parts Post Processing Technology Innovation Support Material and Unmelted Powder Removal - Surface Roughness and Fatigue Strenght Improvement Technology for AM Parts

  Pre-Registration not required

  
  
  

  Mr. Taiki Matsui
  SUGINO MACHINE LIMITED
  Application Development Section Technical Service Department Precision Machine Division
  Assistant Manager
  

• Feb. 2, 2024 (Fri.) 11:15 ~ 11:45

  Seeds & Needs Seminar A［East hall4］
• HORIBA's particle measurement technologies! Introduction of evaluation of advanced materials and pharmaceuticals, and automated systems for particle measurement.

  Pre-Registration not required

  
  
  Mr. Shota Yashiki
  HORIBA, Ltd.
  

• Feb. 2, 2024 (Fri.) 11:30 ~ 12:15

  Seeds & Needs Seminar C [East hall 5]
• Preparation of Biopolymer-based Hybrid Materials and their Comprehensive Characterization at the ARIM facilities at CIST.

  Pre-Registration not required

  
  
  Prof. Karthaus Olaf
  Chitose Institute of Science and Technology / Photonics World Consortium
  Department of Applied Chemistry and Bioscience,Faculty of Science and Technology
  Professor
  

• Feb. 2, 2024 (Fri.) 11:40 ~ 12:10

  Stage C［East hall 7］
• 【ENEX】Exhibitor Presentation

  Pre-Registration not required

  
  

  ---

  11:40-12:10

  Development of Innovative Raw Material (Ferro-Coke) for Blast Furnaces to Reduce Energy Consumption in Iron Making Process by 10% (Accomplishment Report/JFE Steel)

  Mr. Takashi ANYASHIKI
  JFE Steel Corporation
  

• Feb. 2, 2024 (Fri.) 12:00 ~ 12:30

  TCT Introducing Stage［East hall 3］
• Introduction of Polymer Additives contribute to Functionalization of Materials for 3D Printing

  Pre-Registration not required

  
  
  Mr. Tatsuhito NAKAMURA
  ADEKA Corporation
  Polymer Additives R&D Laboratory
  Research Associate
  

• Feb. 2, 2024 (Fri.) 12:30 ~ 13:00

  Stage C［East hall 7］
• 【RENEWABLE ENERGY】Exhibitor Presentation

  Pre-Registration not required

  
  

  ---

  12:30-13:00

  GX promotion in Kitakyushu region and Kitakyushu Science and Research Park

  Mr. Mito Toshikazu
  FAIS
  

• Feb. 2, 2024 (Fri.) 12:30 ~ 13:15

  Seeds & Needs Seminar C [East hall 5]
• Towards a circular economy: Initiatives of research base for organic and bio-based materials, AIST Chugoku

  Pre-Registration not required

  
  

  ---

  

  12:30-12:45

  Overview and strategy of the Research Base for Organic and Bio-based Materials

  Dr. Hiroaki Sato
  AIST Chugoku, National Institute of Advanced Industrial Science and Technology (AIST)
  Director-General
  Research Institute for Sustainable Chemistry
  Director of the Institute
  

  ---

  

  12:45-13:00

  Process Informatics for Development of High-Performance Polymer Composite Materials

  Dr. Keita Sakakibara
  National Institute of Advanced Industrial Science and Technology (AIST)
  Cellulose Materials Group, Research Institute for Sustainable Chemistry
  Group Leader
  

  ---

  

  13:00-13:15

  Material Diagnosis towards Resource Circulation of Plastics

  Dr. Hirohmi Watanbe
  National Institute of Advanced Industrial Science and Technology (AIST)
  Organic Materials Diagnosis Group, Research Institute for Sustainable Chemistry
  Senior Researcher
  

• Feb. 2, 2024 (Fri.) 12:30 ~ 13:45

  Stage A［East hall 8］
• InterAqua organizers seminar

  Pre-Registration required

  
  

• Feb. 2, 2024 (Fri.) 12:45 ~ 13:15

  TCT Introducing Stage［East hall 3］
• TRUMPF’s Metal 3D Printing Technologies ~ The Latest AM Trend from Germany ~

  Pre-Registration not required

  
  
  

  Mr. Hiroyuki Oka
  TRUMPF CORPORATION
  

• Feb. 2, 2024 (Fri.) 12:45 ~ 13:15

  Seeds & Needs Seminar A［East hall4］
• Introduction of DX solutions for materials design

  Pre-Registration not required

  
  
  Ms. Maiko Watanabe
  JSOL Corporation
  Engineering Technology Division
  

• Feb. 2, 2024 (Fri.) 12:45 ~ 13:25

  Convertech Stage［East hall 6］
• Proposal for visualization, efficiency improvement, skill lessening, and labor shortage solution in the flexible packaging industry

  Pre-Registration required

  
  
  

  Mr. nakashioya yuzo
  DAC ENGINEERING CO., LTD
  

  ---

  

  Mr. hibino minoru
  New IWASHO CO., LTD.
  

• Feb. 2, 2024 (Fri.) 13:00 ~ 13:30

  Material Stage［East hall 5］
• Transforming R&D by fusing virtual and real laboratory.

  Pre-Registration required

  
  
  

  Mr. Kamijo Goro
  Dassault Systems K.K.
  

• Feb. 2, 2024 (Fri.) 13:00 ~ 15:00

  Stage D［East hall 7］
• Let's create an IoT Smart House together!

  Pre-Registration required

  
  

  ---

  

  13:00-13:30

  IoT Smart Houses to Create People’s Happiness

  Prof. ISSHIKI Masao
  Kanagawa Institute of Technology
  Institute for Research Initiatives, Smart House Research Center
  Specially Appointed Professor, Director of Smart House Research Center
  

  ---

  

  13:30-14:00

  Latest trends in smart house and living design

  Dr. masato oota
  Sekisui Chemical Co., Ltd.
  

  ---

  14:00-14:30

  ECHONET, the IoT standard for opening new doors for the digital society

  Dr. nagasawa masato
  ECHONET Consortium
  Promotion Committee
  Chairman
  
  Mitsubishi Electric Corporation
  IoT Life Solutin Business Strategy Center
  Senior Manager
  

• Feb. 2, 2024 (Fri.) 13:15 ~ 14:15

  WELL-TECH Stage［East hall 5］
• Society of Well-being Preparatory Study Session for "Wellbeing and Technology"

  Pre-Registration required

  
  
  

  Mr. Hiroshi Maruo
  NIKKEI BP INTELLIGENCE GROUP
  

  ---

  

  Dr. Junji Watanabe
  NTT Communication Science Laboratories
  

• Feb. 2, 2024 (Fri.) 13:20 ~ 13:50

  Stage C［East hall 7］
• 【ENEX】Exhibitor Presentation

  Pre-Registration not required

  
  

• Feb. 2, 2024 (Fri.) 13:20 ~ 15:50

  Surface Finishing Seminar [East hall 3 Entrance]
• Surface Technology Association　Subcommittee Lecture

  Pre-Registration not required

  
  

  ---

  

  13:20-14:00

  Introduction of low-temperature sealing agent that provides excellent corrosion resistance of difficult-to-anodize materials.

  Mr. Midori Miyata
  NIPPON HYOUMEN KAGAKU KBUSHIKI KAISHA
  

  ---

  14:10-14:50

  Mr. Hirotaka Kurita
  Advanced Composite Co., Ltd.
  

  ---

  

  15:00-15:40

  Outlook of the Application of Aluminum Alloys for Metal Additive Manufacturing Process

  Dr. Hirotaka Kurita
  YAMAHA MOTOR CO., LTD
  

• Feb. 2, 2024 (Fri.) 13:30 ~ 14:00

  TCT Introducing Stage［East hall 3］
• AM Parts Post Processing Technology Innovation Support Material and Unmelted Powder Removal - Surface Roughness and Fatigue Strenght Improvement Technology for AM Parts

  Pre-Registration not required

  
  
  

  Mr. Ignacio Garcia
  SUGINO MACHINE LIMITED
  Application Development Section Technical Service Department Precision Machine Division
  

• Feb. 2, 2024 (Fri.) 13:30 ~ 14:00

  Seeds & Needs Seminar A［East hall4］
• Deep-Sea-Inspired Chemistry: New Frontiers in Nanotechnology

  Pre-Registration not required

  
  
  Ph.D. Shigeru Deguchi
  Japan Agency for Marine-Earth Science and Technology
  Research Center for Bioscience and Nanoscience
  Director
  

• Feb. 2, 2024 (Fri.) 13:30 ~ 14:15

  Seeds & Needs Seminar C [East hall 5]
• nano cellulose japan seminars

  Pre-Registration not required

  
  

  ---

  13:30-14:15

  Unraveling the Effects of cellulose nanofibers (CNF) through LCA

  Mr. Sawamura Shota
  Sustainable Management Promotion Organization
  

• Feb. 2, 2024 (Fri.) 13:30 ~ 14:15

  Seeds & Needs Seminar B［East hall 4］
• Why don't we use facilities of Nagoya University for your research and development ?

  Pre-Registration not required

  
  
  Dr. osumi Katsufumi
  ARIM Next-Generation Biomaterials Hub, Nagoya University
  

• Feb. 2, 2024 (Fri.) 13:30 ~ 16:20

  ASTEC/SURTECH Stage [East hall 3]
• The 32nd hyodankyo seminar

  Pre-Registration not required

  
  

  ---

  13:30-14:20

  Mr. Noriyuki Shiwaku
  Nissan Motor Co., Ltd.
  

  ---

  

  14:30-15:20

  Life Cycle Assessment for Automobile (LCA)
  

  Prof. Keichiro Sano
  Kanto Gakuin University
  College of Interhuman Symbiotic Studies, Department of Symbiotic Design, Materials & Surface Engineering Research Institut (concurrent)
  Professor, research member
  
  Nihon University
  College of Science and Engineering, Department of Precision Machinery Technology
  Part-time lecturer
  
  Changzhou University, China
  School of Petrolechemical Engineering
  Visiting Professor
  

  ---

  

  15:30-16:20

  Approach to the carbon neutral in the surface treatment

  Mr. Masaki Kato
  AISIN CORPORATION
  

• Feb. 2, 2024 (Fri.) 13:40 ~ 14:10

  Convertech Stage［East hall 6］
• Overview of biodegradation certification test and overseas certification application

  Pre-Registration required

  
  
  Mr. Toshiaki Kisu
  DJK Corporation
  

• Feb. 2, 2024 (Fri.) 13:45 ~ 14:15

  Material Stage［East hall 5］
• "Distillation purification" contributes to high added value of cutting-edge materials

  Pre-Registration required

  
  
  

  Mr. Teppei HOTTA
  OSAKA YUKA INDUSTRY LTD.
  

• Feb. 2, 2024 (Fri.) 14:00 ~ 14:45

  Main Theater［East hall 4］
• 
  
  nano tech award ceremony
  

• Feb. 2, 2024 (Fri.) 14:00 ~ 17:00

  Stage B［East hall 8］
• Human Resource Development and the Marine Industry

  Pre-Registration required

  
  

  ---

  

  14:00-14:45

  Underwater Robot Competition and Engineer Education

  Prof. Masayuki Okada
  Kyushu plytechnic College
  prof.
  

  ---

  

  14:45-15:30

  "Initiatives in the Ocean Engineering Industry

  Mr. Mitsuhiro Kawamura
  Engineering Advancement Association of Japan
  

  ---

  15:30-16:00

  The Methodology and Role of Pre-and Post-Survey in Offshore Wind Farms.

  Mr. Shinichiro Yokoyama
  KAIYO ENGINEERING Co., Ltd.
  

  ---

  

  16:00-16:30

  Floating Offshore Power Generation by TLP Technology

  Mr. Toshiya Tomita
  Marine Power Systems
  Country Director - Japan
  

  ---

  

  16:30-17:00

  Translating Coral Conservation Techniques utilize for Nature-based Tourism.

  Mr. Kazuyoshi Kihara
  MM Bridge Co., LTD.
  Engineering Department
  chief Engineer
  

• Feb. 2, 2024 (Fri.) 14:10 ~ 14:40

  Stage C［East hall 7］
• 【RENEWABLE ENERGY 】Exhibitor Presentation

  Pre-Registration not required

  
  

  ---

  14:10-14:40

  Bringing European high-efficiency power generation technology to Japan
  ~Trade up the existing waterway gate. Proposal for gate type Kaplan turbine~

  Mr. Higashikura Syouta
  WWS-JAPAN Co.,Ltd./E-SELECT Co.,Ltd.
  

• Feb. 2, 2024 (Fri.) 14:15 ~ 14:45

  TCT Introducing Stage［East hall 3］
• Surface treatment technology as a post-process in metal AM

  Pre-Registration not required

  
  
  Mr. Syuichi Kamori
  SINTOKOGIO, LTD.
  Surfacetec Company Development Group
  Engineer
  

• Feb. 2, 2024 (Fri.) 14:15 ~ 14:45

  Seeds & Needs Seminar A［East hall4］
• Application of materials informatics in the semiconductor area.

  Pre-Registration not required

  
  
  Mr. Shuhei Kojima
  MI-6 Ltd.
  

• Feb. 2, 2024 (Fri.) 14:25 ~ 14:55

  Convertech Stage［East hall 6］
• Tension analysis and Control testing for Web transportation system by utilizing Simulation - MapleSim Web handling system analysis -

  Pre-Registration required

  
  
  

  Ms. Ai Nagashima
  Maplesoft Japan
  

• Feb. 2, 2024 (Fri.) 14:30 ~ 15:00

  WELL-TECH Stage［East hall 5］
• Smiles turn into donations? "Come on, support the Noto Peninsula with a smile!"

  Pre-Registration required

  
  
  

  Mr. Hayaki Tsuji
  One Smile Foundation
  

  ---

  

  Ms. Mayuka Fukushima
  NTT Communications Corporation
  First Business Solutions / Marketing in Business Solution Division
  Catalyst "Business Producer"
  

• Feb. 2, 2024 (Fri.) 14:30 ~ 15:00

  Material Stage［East hall 5］
• Global Trend on Marine Biodegradability Certification - DIN CERTCO, TÜV AUSTRIA (OK Marine), and JBPA Chemitox's Biodegradability Test / Consulting Service for Certification

  Pre-Registration required

  
  
  Mr. Hiroaki Fujioka
  Chemitox Inc.
  

• Feb. 2, 2024 (Fri.) 14:30 ~ 15:15

  Seeds & Needs Seminar B［East hall 4］
• Let's innovate R&D by promoting the utilization of experimental/analytical data and the introduction of AI.

  Pre-Registration not required

  
  
  Dr. YUTAKA UESHIMA
  QUATRE-i SCIENCE
  

• Feb. 2, 2024 (Fri.) 14:30 ~ 15:15

  Seeds & Needs Seminar C [East hall 5]
• Force sensing technologies using quartz crystal resonator: principle, applications, and the prospects

  Pre-Registration not required

  
  
  Prof. Hirotaka Sugiura
  The University of Tokyo
  Arai Laboratory, Department of Mechanical Engineering
  

• Feb. 2, 2024 (Fri.) 14:30 ~ 16:30

  Stage A［East hall 8］
• Lecture on the "New Energy Grand Prize" Award

  Pre-Registration required

  
  

  ---

  14:30-15:30

  Mr. Koichi Yamasaki
  
  

  ---

  14:30-15:30

  Mr. Minoru Sato
  
  

  ---

  14:30-15:30

  Mr. Akira Inoue
  
  

  ---

  14:30-15:30

  Mr. Tsuyoshi Tomimoto
  
  

  ---

  15:30-16:30

  Mr. Yukiteru Ikai
  
  

• Feb. 2, 2024 (Fri.) 15:00 ~ 15:10

  Main Theater［East hall 4］
• NBCI activities and member services

  Pre-Registration not required

  
  
  Mr. ISHII NOBUAKI
  Nanotechnology Business Creation Initiative
  secretariat
  Secretary General
  

• Feb. 2, 2024 (Fri.) 15:00 ~ 15:30

  Stage C［East hall 7］
• 【InterAqua】Exhibitor Presentation

  Pre-Registration not required

  
  

• Feb. 2, 2024 (Fri.) 15:00 ~ 15:30

  TCT Introducing Stage［East hall 3］
• DX Reskilling: 3DA model, not well known in Japan

  Pre-Registration not required

  
  
  Mr. Yutaka Igarashi
  Digital Theater Co., LTD
  

• Feb. 2, 2024 (Fri.) 15:00 ~ 15:30

  Seeds & Needs Seminar A［East hall4］
• Hitachi high-tech 3D measurement solution SEM/AFM/CSI (Multi-dimensional analysis achieved with measurement ranges and +a functions according to the application.)

  Pre-Registration not required

  
  
  Mr. Kuwahara Mr.Junji
  Hitachi High-Tech Corporation
  

• Feb. 2, 2024 (Fri.) 15:10 ~ 15:45

  Main Theater［East hall 4］
• Resonac’s carbon neutral/digital transformation strategy - Introducing examples of carbon neutral/digital transformation initiatives in research and development -

  Pre-Registration not required

  
  
  Mr. Fukushima Masato
  Resonac Holdings Corporation
  Executive Officer, Chief Technology Officer (CTO)
  

• Feb. 2, 2024 (Fri.) 15:15 ~ 15:45

  Material Stage［East hall 5］
• The state of art additive P-Life that leads non-degradable plastics to ultimately bio-assimilate and the technology acceptance in the world market

  Pre-Registration required

  
  
  

  Mr. ISAO TOYAMA
  P-Life Japan Inc.
  

• Feb. 2, 2024 (Fri.) 15:15 ~ 16:00

  Convertech Stage［East hall 6］
• Closing Session

  Pre-Registration required

  
  

• Feb. 2, 2024 (Fri.) 15:20 ~ 16:50

  Stage D［East hall 7］
• JEITA Seminar　

  Pre-Registration required

  
  

  ---

  

  15:20-16:05

  RENKEI Control for Achieving Sustainable Energy Savings

  Mr. Ken'ichi Kamada
  Japan Electronics and Information Technology Industries Association (JEITA)
  

  ---

  

  16:05-16:50

  Global Standard for Energy Management to Support Carbon Neutrality

  Mr. Nobuyuki Sato
  Japan Electronics and Information Technology Industries Association
  Energy Management Standardization Sub-Committee/Chuo Electronics Co., Ltd.
  

• Feb. 2, 2024 (Fri.) 15:30 ~ 17:00

  Seeds & Needs Seminar B［East hall 4］
• Joint Seminar of Organizer & Center for Colloid & Dispersion Technology Dispersion technology as a key to the development of battery and electronics materials - Current status of standardisation in Europe

  Pre-Registration required

  Simultaneous interpretation

  
  
  Dr. Shin-ichi Takeda
  Center for Colloid and Dispersion Technology
  

  ---

  Dr. Felipe Wolff-Fabris
  European Center for Dispersion Technologies EZD / SKZ
  

  ---

  Dr. Shin-ichi Takeda
  Center for Colloid and Dispersion Technology
  

  ---

  Prof. Dietmar Lerche
  Dr.Lerche KG
  
  LUM GmbH
  

  ---

  Prof. Dietmar Lerche
  Dr.Lerche KG
  

  ---

  Dr. Shin-ichi Takeda
  Center for Colloid and Dispersion Technology
  

• Feb. 2, 2024 (Fri.) 15:45 ~ 16:15

  Seeds & Needs Seminar A［East hall4］
• Introduction to the Composite Material Formulation Optimization Method for Achieving Thermal Management Integration of GeoDict and Citrine Platform.

  Pre-Registration not required

  
  
  Mr. Takahiro Kaneko
  SCSK Corporation
  

• Feb. 2, 2024 (Fri.) 15:50 ~ 16:20

  Stage C［East hall 7］
• 【ENEX】Exhibitor Presentation

  Pre-Registration not required

  
  

  ---

  15:50-16:20

  
  Decarbonization-related subsidy seminar ~Introduction to CO2 visualization SaaS Tanso check~

  Mr. Fukumoto Junji
  tanso-manGX